1 / 4
Lautsprecher Gehäuse transmission line abgestimmt auf Visaton FR10 — image 1
1 / 4

Lautsprecher Gehäuse transmission line abgestimmt auf Visaton FR10

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Transmission line box für Visaton FR10

Rating
0 / 5
Likes
3
Downloads
28
Makes
0
Views
161
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial — Share Alike

Lautsprecherbox für Visaton FR10 (4 Ω)

Diese 3D-gedruckte Lautsprecherbox wurde speziell für den Visaton FR10 (4 Ω) Breitbandlautsprecher entwickelt und bietet ein ausgewogenes Klangbild bei gleichzeitig einfacher Montage. Das Gehäuse eignet sich ideal für alle, die einen leistungsfähigen Lautsprecher komplett selbst herstellen möchten.

Passender Lautsprecher:
Visaton FR10 (4 Ω)
https://www.visaton.de/de/produkte/chassis/breitband-systeme/fr-10-4-ohm

Technische Daten

  • Außenmaße: 286 × 245 × 138 mm

  • Materialverbrauch: ca. 1600 g Filament

    • Berechnet mit 4 Perimetern/Wänden

    • 20 % Infill

Druckempfehlungen

Für ein stabiles und resonanzarmes Gehäuse werden folgende Einstellungen empfohlen:

  • 4 Wände (Perimeter)

  • 20 % Infill

  • Material nach Wahl (PLA, PETG oder vergleichbar)

Montage

Für ein optimales Klangergebnis sollte die oberste Kammer locker bis mittelstark mit Dämmwatte oder Dämmwolle gefüllt werden. Dadurch werden unerwünschte Resonanzen reduziert und das Klangbild verbessert.

Anschließend kann der Visaton FR10 montiert und nach Wunsch verkabelt werden.ereich der obersten


-----------------------------------------------------------------------------------------------------------------------------

Speaker Enclosure for Visaton FR10 (4 Ω)

This 3D-printable speaker enclosure was specifically designed for the Visaton FR10 (4 Ω) full-range driver. It provides a well-balanced sound while remaining easy to print and assemble, making it a great project for DIY audio enthusiasts.

Compatible speaker driver:
Visaton FR10 (4 Ω)
https://www.visaton.de/en/products/drivers/fullrange-systems/fr-10-4-ohm

Specifications

  • External dimensions: 286 × 245 × 138 mm

  • Approximate filament usage: 1600 g

    • Calculated with 4 walls (perimeters)

    • 20% infill

Recommended Print Settings

For a rigid enclosure with good acoustic performance, the following settings are recommended:

  • 4 walls (perimeters)

  • 20% infill

  • PLA, PETG, or a comparable material

Assembly

For the best acoustic performance, loosely to moderately fill the upper chamber with acoustic damping wool or polyester fiberfill. This helps reduce unwanted resonances and improves the overall sound quality.

Once the damping material has been added, install the Visaton FR10 driver and connect it according to your preferred wiring setup.

Tags