Counting matching models…
Small 3" speakers model (made from wood pla), Designed in hornresp for Visaton FRS 8 4 ohm driver. For best sound use self adhesive acoustic felt on walls and fill space with damping material also print with 40% and more infill. You can…
3D Printed Speaker Enclosure for Visaton B80 Chassis based on the "Klang und Ton" “Björn” Concept. I saw the building instructions for this initially in the magazine “Klang und Ton 2012/1” and adapted their concept to 3d printing. I…
AudioHardwareChildProtection :-) Easy mount with the original screws Printed without infill! CAD:…
A Speaker holder, designed as box, with louder and more voluminous sound for my https://openmower.de/ build. Will fit in the left or right middle slot of a YardForce Classic 500. Update 08/17/2023 Redesigned a version 4 variant with these…
OpenMower YardForce SA/SC/NX Speaker Box for Visaton K40SQ for use with DFPlayer Mini. Print with PETG 0.2+ Layer Height
głośnik ma być visaton fr10 hm INFORMACJE: logo ma być z czarnego abs-u bo w aceton trzeba włozyć. Reszta z białego pla
Lautsprecherbox für Visaton FR10 (4 Ω) Diese 3D-gedruckte Lautsprecherbox wurde speziell für den Visaton FR10 (4 Ω) Breitbandlautsprecher entwickelt und bietet ein ausgewogenes Klangbild bei gleichzeitig einfacher Montage. Das Gehäuse…
Use this cube for Visaton FR 7 loudspeakers. Print without supports, without brim, use infill of 60% What you need: Visaton FR7 Loudspeaker 8 Tapping Screws Panhead 2.9mm TRU COMPONENTS 718574 Klinken-Steckverbinder 3.5 mm Buchse
A Speaker box, which uses the back-hole of the stock- beeper, as sound- output for my https://openmower.de/ build. Build for YardForce SA600H, but might also fit to other SA/SC models (please report). My major Print values: PLA, 0.4mm…
This is a full range loudspeaker using the well known Visaton FR10 chassis. The speaker is active, with high output Class D amplifier and DSP (digital sound processor). Frequency range -3dB 60Hz - 20000kHz, 1W SPL 86 dB, 30W RMS, 6 litre…
Kleine Lautsprecherbox, perfekt abgestimmt auf Visaton FRS 8-4 Chassis ( https://www.visaton.de/de/produkte/chassis/breitband-systeme/frs-8-4-ohm ) Innenvolumen → ≈ 1,62 Liter brutto Innen: ca. 172 × 102 × 92 mm Außen: 180 x 110 x 100mm…
Om de achterkant te beschermen
Visaton DSM 25 FFL Ersatz Lautsprecher SchutzGitter. Schichtdicke von 0.05mm oder weniger für eine gute, runde Oberfläche empfohlen.
Ersatz Schutzgitter für den Visaton DSM 50 FFL Mitteltöner. (Neue Variante damit der dünne Rand nicht verschmilzt)
Adaptor to mount Visaton FRS-5X Chassis onto a downground Monacor WG-300 Can be used for Wavecone MKII Speaker by donhighend (http://www.donhighend.de/?page_id=8664)
This is my speaker enclosure for the VISATON FRS 8 M drivers, designed for very narrow spaces since I have very limited desk space. I created this because the speakers in my monitor don’t sound good enough. A pair of these Visaton FRS 8 M…
This is a housing for a loudspeaker. it must be printed with suport but the suport must not touch the printing plate.
This is not "plug and Play. My tank was a 27MHZ version. Along with many other changes, I converted to the 2.4 GHZ version, and cut off all the various bumps and mounts I no longer needed that were in the way. This will fit flat to to the…
I'll mount the boxes between two wooden boards or stone slabs to give them some more weight and a stand.
This is just another Tonuino Case for the 5 Button Version Easy to print and with some desired updates from my daughter 2Files are 3MF as the STL where making problems.
