1 / 7
Rotating hairclip holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ferriswheel for your hairclips
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Noncommercial
The wheel and the outer frame both need to be printed twice.
For the rods i used 14mm wooden rods from the local hardwarestore. I cut 5 to length, in my case 16cm. these i used to make the 'drum'. For the frame i used the same rods, but made them 1cm bigger. I also added a stl of a rod to make the model fully printable.
Good luck and happy printing.