2011 grip safety block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drop in grip safety block for 2011s, No permanent modifications required just drop in on top of your mainspring housing
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 143
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Drop in grip safety block for 2011s, No permanent modifications required just drop in on top of your mainspring housing behind the grip safety tails over top of the hammer strut and reassemble. no need to pin your safety using this
PETG is what i used with good success, but any other strong filament such as nylon or carbon fiber blends would work too possibly TPU but i have not tested with any of those yet.
Print the part flat using 100% infill
I am not responsible for how you use this part please maintain all proper safety fundamentals
Printer - Prusa mk4s
Layer height - 0.2mm
Filament- PETG
Nozzle- 0.4
Nozzle temp- 255c
Bed temp- 85c