1 / 5
Kitchen Aid mixer attachment hanger (screw in, no glue) — image 1
1 / 5

Kitchen Aid mixer attachment hanger (screw in, no glue)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of DownRight's KA attachment hanger. 1. Wedge, to prevent pins rotating 2. Split for smal build plates

Rating
0 / 5
Likes
2
Downloads
21
Makes
0
Views
77
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

A remix of DownRight's Kichen Aid stand mixer attachment hanger.

1. Split the 4-piece hanger into 2 so it fits on smaller build plates.
2. Screw holes moved to a better orientation. (If you're using tapered wood screws.)
3. Added a wedge on the poles and holes so the pieces don't rotate -- no glue required.

Slicing recommendations:
Slice the pin at 95% scale and the plate and pole at 100%. This was my first time remixing, and tolerances were a bit tight.

Printing recommendations:
Filament: PETG or PLA.
Layer height: 0.15mm - 0.25mm.

My print settings were:
PETG, 0.15mm layer height. I printed in 0.15mm for smooth curve on the pin, but honestly it was not necessary.

Tags