AirCircle — DIY Air Quality Monitor Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed puck enclosure for a DIY air quality monitor. Glows green-to-red. Inspired by AirCube.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
# AirCircle — 3D-printed DIY air quality monitor
A round, glowy desk companion that tells you how your air feels — green when it's good, red when you should crack a window.
This upload is the 3D-printed enclosure (base, tab, translucent top). Electronics, firmware, wiring, and the full build guide live on GitHub.
---
## What you get (STL files)
- Base — holds the sensor module, ESP32-H2 SuperMini, and LED ring
- Tab — supports the microcontroller board
- Top — translucent diffuser for the WS2812 ring glow
STEP source file is on GitHub if you want to tweak dimensions.
---
## What you still need to buy
This is a DIY electronics project, not a plug-and-play product.
| Part | Notes |
|------|-------|
| ESP32-H2 SuperMini | H2 variant (Zigbee) |
| ENS160 + AHT21 sensor module | Air quality + temp/humidity |
| WS2812 RGB LED ring | e.g. 16-LED |
| M3×4, M3×6 screws | Sensor + board mounting |
| M2 screws (optional) | LED ring, if friction fit is loose |
| USB data cable | Power + firmware flashing |
Example part links and AliExpress listings are in the GitHub README.
---
## Build overview
1. Print the three STL files (translucent filament for the top!)
2. Solder sensor, ESP32-H2, and LED ring per the wiring diagram
3. Assemble — sensor (M3×4), tab + board (M3×6), LED ring, screw on top
4. Flash the adapted AirCube firmware from GitHub
5. Plug in — readings stabilize after ~3 min warm-up
Optional: pair over Zigbee with Home Assistant.
---
## Print tips
- Material: PLA or PETG (PETG tolerates more warmth near the electronics)
- Top cover: translucent / silk PLA / natural PETG for the best glow
- Orientation: flat on the bed, largest face down
- Supports: usually not needed; add only if your slicer flags bad overhangs
- Dry-fit all parts before soldering
---
## Full build guide & firmware
GitHub: https://github.com/yehudawe/AirCircle
Includes wiring diagram, visual assembly guide, firmware, part links, and Home Assistant setup.
---
## License & attribution
Inspired by [AirCube](https://github.com/StuckAtPrototype/AirCube) by StuckAtPrototype.
Not affiliated with or endorsed by StuckAtPrototype.
Firmware/software based on the open-source AirCube project (**Apache 2.0**).
AirCircle enclosure files shared under Apache 2.0. Keep attribution when you share or remix.
