Cleaning Needle compatible with Gardena Micro Drip System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cleaning needle for sprinkler nozzles with 1mm / 0.5mm tip compatible with the Gardena Micro Drip System.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My cleaning needle broke right away at first use, as it didn't fit in every sprinkler nozzle. Therefore, I decided to create my own cleaning needle to replace the original one.
As I threw the shipped one away to fast, I had to tinker around with the dimensions. The 1mm tip seams to be best usable and compatible.
The 0.5mm version of the cleaning nozzle was my first attempt and I was quite surprised, that it printed well. As this version will fit some nozzles the bigger one doesn't (that's why the shipped one broke), I decided to upload it as well. Printing of the small one is at own risk, as it might fail.
Print Settings
Filament: PETG
Layer height: 0.1mm
Avoid crossing curled overhangs: On
Perimeter generator: Classic (for 0.5mm), Arachne (for 1mm)
Print Speed: 30% or less from the beginning (e.g. by adding custom GCODE: M220 S30 on Layer 1)
Note: Arachne didn't render the tip of the cleaner (0.5mm) correctly, as some layers were missing. This was solved by using the Classic perimeter generator.
Please like, if this print is helping you.