LEXUS-ES300/330 CUPHOLDER-FIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom Lexus ES300/ES330 cupholder fix (2001–2006) — 3D-printed replacement part, not OEM.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom-designed replacement cupholder for the Lexus ES300 (2001–2003) and ES330 (2004–2006). This part is designed to fix the common issue of the factory cupholder cracking, sagging, or failing to hold drinks securely.
______________________________________________________________________________________________________________________________
Compatibility:
Lexus ES300 (2001–2003)
Lexus ES330 (2004–2006)
Print settings:
Material: PETG or ABS recommended (console area can get warm)
Infill: 30–50%
Supports: [YES]
Installation:
Push the es330-clip down into the center bracket in your console until it sits snug in place.
Take the cupholder piece and line up the slot in its center bridge with the es330-clip, then slide it down over the clip until the two rings drop into the cupholder openings on each side.
Press down evenly until it sits flat and doesn't move.
Put a cup in each ring to check that it holds steady.
No glue or screws needed — it just sits in place.