1 / 4
Squarebody truck/GM car Window and Lock switch wiring terminals — image 1
1 / 4

Squarebody truck/GM car Window and Lock switch wiring terminals

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These models can be printed to replace the factory door switch wiring connectors.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
42
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

I printed these out of ASA GF to replace the ones in my 83 K20. I haven't had any problems with the summer heat softening the plastic. I DO NOT recommend trusting these made out of anything with a low melting point. If you do, ensure you have a proper fused circuit providing power to the doors and keep your fingers crossed that nothing shorts to ground.

They use Auveco #23167 pin grip terminals; I purchased mine on amazon. These terminals only go up to 14-gauge wire, if you can find some bigger sizes let me know. I remade my entire power harness for both doors, so it wasn't an issue with the larger factory wires. I did not try to see if the factory terminals would fit, I do know they are slightly different than the Auveco's.

I went overkill on clamping the cover to the base after dealing with my faulty factory connectors coming apart so many times. They use #2 x 1/4" long screws to hold them together. I settled on some nice brass screws that I purchased at Lowes. If the metric system is more your flavor power to you, let me know what size works and I will update the description.

didn't grab a pic of the installed prints when I had my door panels off unfortunately. Wish I would've. I hope these help a few people out. If you end up using them, post some pics. Thanks!

Tags