Dual Mean Well UHP-200 DIN mount with 40mm fans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the Mean Well UHP-200 series power supplies, with 40mm fan and optional JST breakout for clean wiring
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- BSD License
Mount for 2x Mean Well UHP-200 series power supply, including space for 40mm fans (4010, 4015, 4020).
Required hardware:
- 24x M3x4x5 heat insert
- 12x M3x8mm SHCS for mounting the power supply and mounting the DIN rail adapter
- 8x M3x18mm BHCS for mounting the fans (with inserts)
- 8x M3x25mm BHCS for mounting the fans (if mounting with nuts)
- 4x M3x6mm FHCS for mounting the lid
- 4x M3 hex nut for mounting the lid
- 3x JST XH 2p terminal
- some wiring (22 AWG)
- soldering iron
Preparation:
- Prepare a JST XH 2p terminal, add 2 wires to each leg (e.g. a 40mm and 50mm wire)
- Insert the JST XH 2p on the front, make sure to thread on wire from each leg trough the back holes
- Solder the wire ends each to a JST XH 2p
- Insert the JST XH 2p terminals into the holes while feeding back the wire into the internal cavity
- Secure with a dab of CA glue
Setup:
- Press the heat inserts into both sides
- Insert the lid nuts inside the sides
- (optionally) press the heat inserts into the fan screw mounts, or secure with nuts
- Mount the fan
- Mount the power supplies
- Mount the lid
- Mount the DIN bracket clips
Using the DIN rail clips from the "DIN rail bracket redux" project, inspired by DoubleT's Dual UHP mount, but otherwise original work.