1 / 1
HLK-LD2450 presence detector mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ball-joint mount and puck-shaped enclosure for an LD2450 mmWave radar plus an ESP32-S3 Super Mini or ESP32 S2 Mini
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Includes an enclosure for an ESP32 S2 Mini or ESP32-S3 Super Mini, which you can flash with ESPHome. Print the bottom layer of the front panel with 0mm thickness to avoid interfering with the mmWave signal. Print settings don't matter much beyond that. Use an M3 or M4 screw and nut to clamp the ball joint