1 / 4
Salad Fork A/B Motor Bumper for Cartographer/Beacon
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fixes the problem of your cartographer/beacon prob hitting your rear leadscrew on the 180 Salad Fork.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Open Community License v1.1 + General Attribution v1
After installing my cartographer on my Salad Fork 180 I noticed the probe would hit the top of the rear leadscrew. Being that I didn't want to cause damage I figured I needed about 4mm of clearance. Now, I could limit it in software, but since I'm using sensorless homing like a champ I figured this was a safer way. These just mount on the top of each motor assembly. Replace the front two M3x25s with M3x30s and your golden. You will lose about 4mm of travel on the Y.