1 / 2
ASUS Ascent GX10 Cooling Stand for 140mm Intake Fan — image 1
1 / 2

ASUS Ascent GX10 Cooling Stand for 140mm Intake Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cooling stand for ASUS Ascent GX10. Supports a 140mm PWM fan (Arctic P14 Pro) into the bottom intake. Drops in.

Rating
0 / 5
Likes
1
Downloads
83
Makes
0
Views
1,142
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

A drop-in cooling stand for the ASUS Ascent GX10 (NVIDIA GB10 / DGX Spark family). The GX10 pulls intake air through its perforated bottom plate and exhausts out the rear. It can run into thermal limits, throttling & crash with sustained GPU workloads like LLM inference. This stand feeds a 140 mm PWM fan directly into the bottom intake, pressurizing it with cool air. No modification to the unit: the GX10 simply sits on the stand.

Print in PETG or filaments supporting higher temperatures. While the bottom plates tend to be cooler than the top and back plates, it is NOT SAFE TO USE PLA.

Design

  • Stepped body: the GX10 (150 × 150 mm) rests on a perimeter seat; the fan sits in a 140 mm pocket below it with the opening sized so blades stay unobstructed while frame corners have full support

  • 25 mm standoff via four L-shaped legs, sized so the perimeter inlet area matches the fan's swept area — the fan is never choked

  • Legs are separate press-fit parts: peg-and-socket joint, so ride height can be changed by reprinting legs only

  • Cable notch in the rim — fan wire exits under the seated unit without pinching

  • Everything prints support-free

Hardware setup needed

  • 1× Arctic P14 Pro PST (or any 140 mm PWM fan, 27 mm thick, 125 mm holes) —  blowing UP (logo/intake face down)

  • Power: 12 V DC wall adapter → DC barrel screw-terminal jack → 4-pin fan cable; add a Noctua NA-FC1 or similar PWM controller for speed control if needed.

Tags