1 / 2
Fridge + Freezer Vent Wedge — Thetford T2138 (Adria Twin 2024 + others) — image 1
1 / 2

Fridge + Freezer Vent Wedge — Thetford T2138 (Adria Twin 2024 + others)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A clip-on wedge that props both the fridge door and the freezer compartment door ajar during storage.

Rating
0 / 5
Likes
5
Downloads
32
Makes
0
Views
133
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

If you leave a fridge sealed shut for weeks in storage, it goes musty and mouldy — and the freezer compartment inside is even worse, because it stays shut and stale even when the main door is vented.

This is the two-in-one version of my freezer vent wedge: it props both the main fridge door and the internal freezer compartment door ajar at the same time, so air circulates through the whole cabinet while your van sits unused. One part, both doors vented. Pop it on when you park up for the season, take it off when you're back on the road.

It's designed around the Thetford T2138 — the 138 L / 11.6 L-freezer 12 V compressor fridge from Thetford's T2000 series (developed from the T2090). I fitted mine in a 2024 Adria Twin, but the same fridge is used across a range of other coachbuilt vans and caravans, so there's a good chance it'll suit yours too. If your van has the T2138 (or a close relative in the T2000 range), this should fit.

The main thing that sets it apart: it holds the doors open without compressing the door seals. A lot of vent spacers work by wedging into the gasket and squashing it — do that for months at a time and you're slowly wrecking the seal. This one lets the doors rest open on their own edges instead, so the gaskets keep their shape. Should help both seals last longer.

Freezer-only version

Prefer to use your fridge's own built-in vent catch and only prop the freezer? There's a freezer-only version of this wedge too — this one is for anyone who wants a single part to vent both doors.

Why you'd want one

  • Vents both the fridge and freezer in one go — no mould, no stale smell

  • Clips on and off in seconds — no tools, no marks

  • Doesn't squish the door seals (unlike typical vent spacers), so it's kinder to the gaskets long-term

  • Prints in well under a couple of hours with no supports

  • Print it in a bright colour so you don't forget to remove it before you next load up

Fitment notes

  • Confirmed on the Thetford T2138 in a 2024 Adria Twin.

  • Likely to fit other vans/caravans running the same T2138 or T2000-series fridge — if you've fitted it to a different model, drop a comment so I can add it to the list.

  • If you're unsure, compare your door thickness/edge to the photos before printing, or scale to suit.

Version to prop open only the freezer:
https://www.printables.com/model/1780510-freezer-vent-wedge-thetford-t2138-fridge-adria-twi

Tags