Counting matching models…
This is a door-lock for ADRIA recreational vehicle (Camper) which as two parts, one to be mounted on the door (the male part - “Bloque porte ADRIA - Porte”) and the second to be mounted on the camper body (the female part - “Bloque porte…
My daughter was chasing an Adrian ring from the miraculous series. Found this on Thingiverse and printed in PLA at 70% size for a good fit on a 10y old. Printed with full supports. You can see the original design at…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
Caravan Sink Strainer Stopper replacement - I made it for a neighbour, who told me this type is often getting damaged Print instructions 0,4mm nozzle 0,15mm layer ABS prefered supports needed aceton smoothing recommended
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
Inspired by Yellowban1s design I made my own based off the BIT system, which provides lids to the compartments. When the sheets for the game start to run out, there'll be more air in the box and things will not stay in place. Print with…
The Starlink bracket should fit to most of the Adria camper(tested with Alpina 663HT) Printed with PETG and Infill 30% Suction cups used: https://tinyurl.com/w3wfrpc3 (can be purchased cheaper @Aliexpress)
If you want to replace standard table to a smaller or just replace a broken part. Use this table brackets for your new or extra table. Print as shown i pictures. PETG 0.15 4 perimeters 50% infill
This is a collection of things I designed for our Adria Action caravan. Our is a 361LH from 2021 and I haven't tested that the designs work for other versions or model years. So far: A double hook for the toilet door A single hook for the…
I bring you a Hadrian's Head flower pot organizer ideal for decorating your home. It was printed on a Creality Ender 3 v2 with 20% infill. Does not need supports Approximate total spent filament: 231 g Total printing hours on my creality…
A printable replacement part for the cubbord latches in Adria motorhomes and caravans (The brown latches). They are not 100% similiar, but they are close enough that they get the work done. The part called “Drapwer Catch” has a 1.5mm…
Der Adapter ist so klein, dass Sie ihn nie wieder suchen müssen; er kann immer am Schlauch dran bleiben. Das spart auch eine zusätzliche Halterung. Der Schnellverschluss kann aber auch jederzeit problemlos abgezogen werden. Die 6…
Since the cabinet closure can break very easily here is a closure that was designed a little more stable but can still b
( klíčenka - camper, karavan)
I got tired of spill water dripping down in the space between sink. With this any water spill will instead get down in the sink. I used bytul sealing tape to fix it to the plastic base (Stokvis bytul tape)
If you want to replace standard table to a smaller or just replace broken part. Use this tooth bracket for your new table. Print as shown i pictures. PETG 0.15 4 perimeters 50% infill
This lithophane is meant to be used with the awesome holder by @bobby here: https://www.printables.com/model/73113-lithophane-holder There is also a link to the very affordable and bright lights on Amazon linked from his build. As you can…
letra grande em branco nome em azul colados com fita dupla face
The original model from PapaSchlumpf is for left doors. This part makes it compatible with the right doors.
If you leave a fridge or freezer sealed shut for weeks in storage, it goes musty and mouldy. Most campervan fridge doors have a built-in "vent" catch that holds the main door slightly open for exactly this reason — but the internal…
Gatehouse of Hadrian's Wall. Hadrian's Wall is a former defensive fortification of the Roman province of Britannia, begun in AD 122 in the reign of the Emperor Hadrian. Running from Wallsend on the River Tyne in the east to…
If you want to replace standard table to a smaller. We use this table support, in our Adria Twin 640 SLB and it levels the table. Print as shown i pictures. PETG 0.15 4 perimeters 50% infill
If you leave a fridge sealed shut for weeks in storage, it goes musty and mouldy — and the freezer compartment inside is even worse, because it stays shut and stale even when the main door is vented. This is the two-in-one version of my…
This is a storage tray for the wall Resource blocks found in the board game Hadrian's Wall. The tray is a remix of ryankinnaman's Arnak Trays, and part of a set of storage components for Hadrian's Wall. Wife painted the resource tray with…
The original lampshade in our caravan looked like a flowerpot, so I wanted to design a nicer one.
Wanted an insert that would also double as a token tray for Hadrian's wall. Makes setup and tear down quick and easy.
Placa de nombre Adrian la hice con base negra y le puse un borde dorado para que diera un aspecto más moderno y se viera mejor, se sujeta perfectamente ya que lo diseñe para que no le hiciera falta ningún soporte. Ideal para decoración de…
The water knob in our Caravan were broken, so i draw this from the old one. Will propably fit on a lot of caravan brands as it seems to be a universal type. I made it in PLA and it has been ok for about two years now.
Portrait Bust of the Emperor Hadrian Marble Roman, Hadrianic period ca. A.D. 118-120 Found in Hadrian's villa at Tibur (modern Tivoli, near Rome) This bust shows Hadrian in the early part of his reign, when his beard was still relatively…
This part is a replacement for SP563 pictured below. print with PETG and 100% infill.
Adapter zur Verbindung eines 3/4-Zoll-Schlauchs als Abwasserleitung am Grauwassertank. Hab es in TPU-gedruckt und den 3/4-Zoll-Schlauch mit Sekundenkleber im Adapter befestigt.
Adria Schienensystem Basis-Clip (Universal-Adapter) Dieser Clip ist die perfekte Lösung für alle Besitzer eines Adria Wohnmobils oder Caravans , die das integrierte Schienensystem (z. B. in der Küche oder im Bad) individuell erweitern…
With this holder, its possible to have the apple tv fixed installed above the tv regardless if you need to turn the tv in the other direction (which you normally should do when doing transportation of the caravan). The model was printed…
Adria Schienensystem: IKEA FEJKA Pflanzenhalter Bring etwas Grün in deinen Camper! Dieser Halter wurde speziell entwickelt, um die beliebten IKEA FEJKA Kunstpflanzen (9 cm Topfdurchmesser) sicher und klapperfrei am Adria Schienensystem zu…
This is a storage tray for the worker meeples found in the board game Hadrian's Wall. It is part of a set of storage components for Hadrian's Wall. The tray is indented along the internal walls so that two player mats can nestle into it,…
I have been missing a plug for the table. I dont miss any more
not printed on my Prusa, printed this one on my previous printer, cad made in fusion 360.
Klappenhalter/Schrankhalter-Aufnahme passend für Wohnwagen Adria Andora. Robuste und langlebige Halterung zur sicheren Fixierung von Klappen oder Schranktüren. Fill: 15%
Parts for update of cabinet in trunk area of ADRIA TWIN 640 SLB camper. You will gain 62mm more on depth in boxes. Designed for screwing/glueing to the back edge of cabinet after removing original backpanel. Recomended material ASA/ABS,…
I made this screw cover, after the one in our campervan broke. It is sized 33x32x9mm and was printed with a 0.4 nozzle. I would reccommend a 0.2 nozzle so that it will achive more stability.
Simple key tag for your keys to your Adria Van. If you want two color, add new colour at 3.20 mm. Ironing on top will make it even better.
I stumbled upon a 2008 blog post by Adrian Bowyer, the inventor of the RepRap Project in 2005, where he talked about designing a coat hook so he could hang is lab cost somewhere other than his tripod. You can read the post here:…
If you are like me and only use one sheet from your game, you have a few centimeters free above the game sheets :)If you are like me and don't use only one sheet from your game, you have a few centimeters free above the game sheets :) I…
This Hadrian Bust is a historical warrior soldier figurine STL for collectors, re-enactors, and tabletop gamers who want an accurate classical Roman style bust display. Use it for painting practice, desk and shelf decor, wargaming and…
Storage box for Hadrian's Wall board game. Easy to print. The lid can also be used as a secondary tray if you are playing with more than one player. I cut the markings from coloured vinyl foil on the top. You can also print them out (you…
Kleines Tool, große Wirkung. Jetzt sind das Spülmittek und der Schwamm aufgeräumt. Wir haben einen Adria Aviva. Das Gitter besteht aus zwei Teilen, die zusammengesetzt werden. Die Fixierung erfolgt durch den Wasserhahn, dessen unteres…
small one is 58mm x 80mm High. big ones are 74mm x 80mm High. super easy print. tok about 3 hours on my swx2 with 0.6nozzle and 0.3 layer. no support, no brim enjoy.
PL (Opis Polski) Dedykowany uchwyt do Starlinka Mini, zaprojektowany pod charakterystyczny kształt dachu (pochylony „garb”) w kamperach marki Adria . Konstrukcja stawia na maksymalne bezpieczeństwo i wykorzystanie oryginalnych akcesoriów…
Racket based on mixed sourced but ending on 103 cm bore length with nominal unit spacing on bore holes tuning with 6 mm bore. its pretty small and pretty awesome. . Print in PLA and I tested with 25% infill but depending on your preffered…
Saint Adrian van Hilvarenbeek devotional statue for display, a sacred saint figure in a classic sculpture style ideal for religious art lovers and collectors. This devotional statue is suited for display on shelves, altars, or mantels,…
Cassette pleated blinds and flyscreens all suffer the same fate: the internal control cord stretches, loses tension, and the blind creeps back down on its own. The official fix is fishing out the tensioner and adjusting it — this is the…
I made this screw cover, after the one in our campervan broke. It is sized 33x32x9mm and was printed with a 0.4 nozzle. I would reccommend a 0.2 nozzle so that it will achive more stability.
Adapter zur Verbindung eines 3/4-Zoll-Schlauchs als Abwasserleitung am Grauwassertank. Hab es in TPU-gedruckt und den 3/4-Zoll-Schlauch mit Sekundenkleber im Adapter befestigt.
Used AI to get a mode then I fixed it up using blender, looking closely there are flaws but you'll have to forgive me. I hope you find it cool. The original artist is Adriaen de Vries.
Adria Schienensystem Basis-Clip (Universal-Adapter) Dieser Clip ist die perfekte Lösung für alle Besitzer eines Adria Wohnmobils oder Caravans , die das integrierte Schienensystem (z. B. in der Küche oder im Bad) individuell erweitern…
Adria Schienensystem: IKEA FEJKA Pflanzenhalter Bring etwas Grün in deinen Camper! Dieser Halter wurde speziell entwickelt, um die beliebten IKEA FEJKA Kunstpflanzen (9 cm Topfdurchmesser) sicher und klapperfrei am Adria Schienensystem zu…
Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%. Filamento BASICO de Control 3D en varios colores (Español). Espesores de las capas amarillo 2mm, negro 1mm y blanco 0.8mm Kingroon KP3S Printed with 0.4 nozzle, layers…
Here is a simple insert for Hadrian's Wall. Cards separated by player color, playable fate card deck, two resource trays. Sorry, this one doesn't fit sleeved cards. Print 2 each of the resource tray and lid, and one each of fate cards,…
The original had its heart in a good place, wanting to combine the insert with the setup. Most tweaks were to align asymmetries and misalignments with the depth and layout of the insert. The rest were added quality-of-life improvements.
box for 5 channel control panel from Aliexpress - 105x150mm Recomended material ASA/ABS (heat stabile)
Some time ago I bought a toy tractor for a kid. It is made by Italian company Adriatic. Later I realized it is similar to tractors from Bruder, but I didnt find any accessories for it as opposed to many available from Bruder. So an idea…
I am uploading a latch that is originally designed for a Adria Camper / Caravan, but it has may other applications as it is a latch that can be used in many furniture / kitchens. Print at 100% in your favorite filament, preferably bit…
Adrian's clock, straight out of the Event Series! To realize the outer piece of the clock with the embossed dial and Adrian's face I hot swapped the filament while printing. The clock mechanism should be standard, I purchased a cheap one…
Printable box insert for the roll 'n' write board game Hadrian's wall. Provided in both whole and split version for smaller printers (full length is 216mm). Component trays have slope insides for getting that tricky last piece(s). Card…
This is a storage tray for the Fate cards found in the board game Hadrian's Wall. The tray is part of a set of storage components for Hadrian's Wall. The tray stores both the Fate cards and all of the Roman General player cards. I…
This is an organizer for Hadrian's Wall, I didn't like any of the ones that I found with a quick search. So I taught myself basic Tinkercad, borrowed a set of digital caliper's from a friend and proceeded to start printing. This organizer…
This token tray is a versatile and customizable solution that brings order and efficiency to your game. It allows you to neatly organize and display your game tokens, creating a visually stunning centerpiece on your gaming table. Inspired…
I recommend PETG with (at least) 3 Perimeters. After struggling with the original Adria Adora curtain clips, which were too flimsy and kept breaking, I decided to take matters into my own hands. I've designed a 3D print model that's far…
Here is my version of organizer for this board game. Very simple and fast to print. Took on P1S only around 5 hours. I printed it with 0.24mm standart profile on P1S. 15% infill was enough. Fits all the sheets from the beginning. Maybe…
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal , che sarà molto apprezzata. Questa è una scritta decorativa che puoi stampare in…
Print on side for maximise strength Stampare sul lato per avere la massima resistenza
This is a simple tool hanger large enough to put a hammer in on an Adrian Steel utility rail.
Prints well in ABS 6 wall loops, 25% gyroid infill.
I wanted some support for change my light on Adria twin camper. I designed some parts for it. Be careful for cables to drop to the hole! Category: Automotive
