1 / 8
Transmitter tray console for Spektrum DX6, DX7, DX8 RC remote control — image 1
1 / 8

Transmitter tray console for Spektrum DX6, DX7, DX8 RC remote control

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Transmitter tray console for Spektrum DX6, DX7, DX8 RC remote control

Rating
5 / 5
Likes
4
Downloads
63
Makes
1
Views
230
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a tray console for Spektrum RC Transmitter DX6, DX7, DX8.
Transmitter gets fully fixed and can't fall out. 
The transmitter console can be placed either flat or upright without the transmitter touching the ground.

Parts 1 & 2 are availabe in two versions regarding printer size.
If you have a bigger printer, you can use the "Full" files.
If you have a standard printer, you can use the "Half" files. Here some extra M4 screws are needed.

Part 5 (bracket) is now available in 3 sizes to adjust the tilt angle and optimize the transmitter's center of gravity when worn.
After several tests, I recommend version 5.2 for general use.

At the point where the transmitter rests against the bottom, the top cover has an overhang designed for attaching a foam strip to protect your transmitter.

Use ASA for UV and better heat resistance; otherwise, PETG will also work.
Use 3 or 4 walls and 30-40% Infill (Gyroid or Hexagon)

Needed:
16x M4 screws, 16-25mm (for fing parts 4)
4x M4 screws, 16mm (for parts 5)
4x M3 screws, 16 or 18mm (for part 3)
1x camera lanyard


Tags