Shelly controlled BentoBox v2.0 5015 pull-configuration and smaller shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the 5015 pull-configuration which can be remote controlled using a Shelly, incl. other modifications
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of @SSX556_913491 's BentoBox v2.0 5015 pull-configuration.
The main feature of this remix is to add compartments for a Shelly 1 and WAGO 221 spring-clamp connectors. Moreover, this remix includes a shroud that is massively reduced in height. This makes room for a bigger carbon box and/or a second hepa filter as shown in the pictures or here.
All changes made to the original model:
Base
Slightly increased the height so that the Shelly fits in
Added compartments for Shelly and WAGO spring-clamp connectors. Use some double-sided tape to fix them.
Closed front-holes
No heat inserts needed: The holes for the heat inserts were replaced by smaller holes where M3 screws can directly be screwed in
All magnet holes are for 6x2mm magnets now (check out my other models for matching carbon/hepa boxes etc.)
Shroud
massively reduced height
6x2mm magnet holes
When printing these you probably want to use my bigger carbon and smaller hepa boxes which are optimized for this configuraiton: