1 / 2
Hepa and carbon filter boxes optimized for shelly-controlled BentoBox v2.0 5015 pull configuration
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides hepa and carbon boxes which are intended to be used with my shelly-controlled BentoBox v2.0 5015 pull config
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For my Shelly controlled BentoBox I wanted ...
... a bigger carbon box (5 instead of 3 rows)
... an additional hepa box that I can place below the carbon box
... a smaller top hepa box to make room available for a larger carbon box
... holes for 6x2mm magnets, because I have plenty of those
That is what this remix offers.
The base (which holds the fans) and the shroud are not part of this model. You can find those here: