Elegant cabinet door pull/handle for BumpMesh.com
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the Elegant Pull Handle specifically created for customizing with BumpMesh.com.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 1
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
A version of the Elegant cabinet door pull/handle specifically designed for customizing with BumpMesh.com.
Import the handle into BumpMesh.com
Under Projection, select "Cylindrical"
Under Masking
select "Include only"
"Fill"
paint only the middle section of the handle
the middle section is offset so there will be no overflow into the joint-ends of the handle
Select a texture, or upload your own.
If you do make some of these, you absolutely have to upload a make. I really want to see what you create!
You'll need M3 hex nuts and screws long enough to reach the nuts. I had to go with M3x50mm screws. It will depend on the thickness of your door. The holes pass well beyond the nut without interfering with the outside shells, so there is some give on the bolt length. Just make sure you don't go too long and push out through the outer shells.
Place the nut in the bottom, then insert the handle. Then place the top nut in the handle and set the top in place, paying attention to the location of the hole so that they align.
I printed this on my Core One with 3dFuel PCTG. The gap between the handle the the top and bottom is only 0.2mm. With modern, high quality filaments, properly tuned profiles (I use 3DFuel's profile) and modern printers, you should have plenty of extra room.
I have included a hole guide for marking the holes for drilling.