Core One + INDX spool mounting plate with integrated puck and numbering
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool mounting plates with integrated puck, makes it more sturdy. The engraved number indicates the toolhead being used
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 79
- Makes
- 1
- Views
- 821
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Core One + INDX spool mounting plates with integrated puck and number of the corresponding tool head, optimized for use of the USS Drybox.
Update 14. August 2026: A version is in the works with 6 spools on the right and 2 spools at the top left, to keep the left side storage usable. This model can also be used to have 2 spools at the top left and 2 spools at the top right for a 4 tool INDX. It will be released soon after i get my CoreOne INDX upgrade kit, because i have to verify the functionality first.
Thanks to 3D Recon, who provided step files of the mounting plates, the effort involved in creating the model was significantly lower.
To avoid drilling 3x12sT scews into plastic pucks, i made a combination of the mounting plate and the spool holder puck. This makes the spool mount more sturdy and even enables the use of 2 Kg spools on the bottom spool holders. It is not recommended to use 2 Kg spools on the top spool holders because they have only two mounting points.
The number of the corresponding tool head is engraved on each mounting plate to clearly indicate which head the filament leads to.
Recommended print setting:
PETG filament
0.4 nozzzle
0.20 mm balanced
3 perimeters
random seam position
gyroid infill
no supports
Mounting instructions: see original assembly guide
for each mounting plate use
4x M3x12rT (Torx head) screws
or 4x M3x12 (Hex head) screws