Trak Racer Button Box

Designed in Tinkercad so its somewhat basic but it achieved the "Dash like" appearance I was going for.

Designed to work with the trakracer profile wheel deck and be very sturdy with an optional quadlock phone mount/arm that utilizes GoPro knuckle.

Face Plates are best printed on a carbon fiber textured plate (Pre Oriented in the .3mf file, 1st layer pattern should come out spot on)

Optional - Small rails around the top plate so you've got somewhere to keep your vape or scooby snacks.
Non railed box is included and can easily be mirrored if required.

I have Included in the files a Blank face plate so you can make your own holes specific to your switches, buttons and rotary encoders. Mirror if using on the Left as the angles sides wont fit otherwise.

Mounting Hardware if building both sides;
6x M8 Bolts and T-nuts. Could use less but I know you've spares Joe, dont be stingy!
8x M4 threaded heat inserts.
8x M4 x 10mm hex head bolts

Quadlock Arm/Gopro Knuckle
2x M4 x 15mm hex head bolts
1x M5 x 20mm Bolt & Nut OR Use an old GoPro mount bolt.
Alternatively you can modify the file to fit whatever you have lying around.

Arduino Mount not added because I use both a Pro Micro and a Leonardo and who knows what you use. Files are there if you feel the need to add one to yours, just do it.


This was an ADHD labour of love to test my skills on Tinkercad. Post your builds as I love to see what the comunity comes up with. Oneday ill try out the big deal but please share the love.

Finished photos will be uploaded when my buttons arrive.