1 / 21
"SPIRIT OF 3D" RIVER STEAMBOAT — image 1
1 / 21

"SPIRIT OF 3D" RIVER STEAMBOAT

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Approximately 0.8m long model of a steam-powered riverboat

Rating
5 / 5
Likes
45
Downloads
167
Makes
0
Views
1,033
Reviews
1

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution

Set sail from the city of Philament for a river cruise on the "Spirit of 3D" steamboat.

This model, largely inspired by the real "Spirit of Peoria," is not particularly difficult in printing ad assembly.

To maintain good curvature of the decks and avoid damaging them with excessive supports, it is recommended to print these parts and the hull vertically to the print bed, using only a few organic supports at critical points.

For assembly, it's best to assemble the hull first, then the three C-shaped load-bearing structures to which the vertical walls and decks will then be attached. Railings, stairs, etc., should be assembled last.

Model printed entirely in PLA using 0.2 layers for larger pieces such as the hull and 0.15-0.1 for smaller pieces.

Tags