WeatherFlow Tempest 2026 (v3) Hub Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Put your Tempest 2026 version's hub onto the wall.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple wall mount for the newest (2026) version of WeatherFlow's Tempest Weather Station Hub. I believe this is the third revision. Didn't see any other designs yet for this version of the Tempest, so wanted to share my own design. Thanks for looking, please rate and leave a comment if it was of use!
Simple to print, could increase the wall count to 3 if you want it really solid. Be sure the model's orientation when printing is upright like the photos, not laying flat. Also I did use supports for one overhang, the cutout for the lights to be seen. Also used #6 x ¾" wood screws from Amazon here to mount.