Multistory expandable desk storage (w 6 diff box sizes)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multistory desk storage that accommodates dozens of small parts
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 10
- Makes
- 1
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This storage system is the continuation of my last project:
(It has instructions for the storage boxes themselves)
New in this version: Second-floor expandability.
Before you start:
Vertical beams slot into the puzzle-piece holes on the boxes and screw into the horizontal beams.
Storage boxes are based on 50 mm "units." Horizontal beams come in two lengths: 150 mm (3 units) and 50 mm (1 unit). Plan your custom layout accordingly.
For second-floor builds, keep the system under 7 units long to prevent sagging.
Printing tips:
Use PETG for horizontal beams (stronger, less sagging). PLA works but risks sagging.
Print vertical beams vertically without supports
Print one vertical beam at a time (they're 200 mm tall and may tip over).
My settings: 15% honeycomb infill, 0.2 mm layer height.
Assembly:
Connecting two horizontal beams: 2× M3x16 screws + 2× M3 hex nuts.
Connecting a horizontal beam to a vertical beam: 2× M3x20 screws + 2× M3 hex nuts
They should be in this exact orientation
To make a second floor, you need 2 M and 2 F vertical beams, plus 50mm and 150mm horizontal beams (quantity depends on your storage system's length).
