[Low material mod] MasterSpool 1 kg - DAS FILAMENT Refill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mod of the Masterspool 1kg that reduces the material usage and print time
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 143
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod uses a modifier volume to remove the top and bottom layers and change the infill type in specific areas of the spool to reduce the amount of filament and time needed to print a spool.
I provided .3mf files that can be directly used to slice the model. Otherwise you can download the step file of the modifier volume and recreate this in another slicer of your choice.
The Savings of both parts can be seen in the table below.
Material/g | Time (hh:mm) | Material/g | Time (hh:mm) | |||
|---|---|---|---|---|---|---|
Part A orig | 121.13 | 06:23 | Part B orig | 76.8 | 04:09 | |
Part A mod | 100.44 | 05:38 | Part B mod | 55.66 | 03:19 | |
Savings | 20.69 | 00:45:00 | Savings | 21.14 | 00:50:00 | |
Savings % | 17.08% | 11.75% | Savings % | 27.53% | 20.08% | |
I also modeled the filament channels into the spool that were present on the previous V3 spool. I like those more than the holes to secure the loose filament end. Step files of both spool parts are available although they are annoying to work with since they were converted from the stl using freecad causing the modification of them to be extremely slow.