Midea PortaSplit Condensate Cleaning Tablet Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder for the Midea PortaSplit. It can hold serilisation and cleaning tablets for AC condensate.
- Rating
- 4.5 / 5
- Likes
- 24
- Downloads
- 273
- Makes
- 3
- Views
- 1,314
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for the Midea PortaSplit. It can hold serilisation and cleaning tablets for AC condensate. This may help prevent the P1 error which is caused by clogging of the condensate pumps filter.
Regularly check on the state of the part. Mold may grow on the rough surface between the layer lines.
I have improved the part by smoothOperand in some key ways:
The tablet is now held as far forward beneath the evaporator as possible. This will help to keep the condensate drops running over the tablet
The grip to insert and remove the part is set at a 45° angle to make insertion and removal easier
Added ribs for rigidity to help prevent breakage at the layer lines
Adjusted dimensions
Steps to use:
Insert a tablet into the holder
Slide the holder beneath the evaporator in the position shown in the picture
Insertion is easier at the right end of this space
Once inserted, slide the holder as far left as possible, so that the tablet is beneath the evaporator
I am using “Aspen Advanced StayClean” Tablets.
Use at your own risk. I take no responsibility for any damage this may cause your device. This modification is not endorsed by Midea.
Changelog:
V1.0b: Sits higher to keep the tablet above the water. On some units this was not always the case due to tolerances. May not fit all units. If the fit is too tight, please use V1.0a
V1.0a: initial model