36 models
Dies ist ein Aufsatz für die Midea Portasplit. Mit diesem Druck können Sie einen 200-mm-Lüftungsschlauch an Ihrer Klimaanlage befestigen. Ich habe außerdem einen Adapter für 100-mm- und 150-mm-Schläuche hinzugefügt.
These are the 3D Files for a Portasplit window seal. More infos here: https://www.reddit.com/r/MideaPortaSplit/
Print is about 100g filament. If your print issn't air tight, just put a coat of acrylic-paint, lacquer, or linseed oil in and ist sealed.
This clamp helps you keeping you window or door fixed while you use a portable split AC like the Midea Portasplit. I printed it in PLA, but PETG or similar would certainly work as well.
(Bigger) CONDENSATION TRAY for Midea PortaSplit | REMIX This is a remix of the great original tray-model for the Midea-PortaSplit with now rounded edges , 2 different sizes & some modifications for better and WATERTIGHT printing ! And…
This drain is printed with PCTG for its hydrophobic properties, but I think any material would work. I used heat-set inserts for the screws, but it should work without them too.
This is a holder for the Midea PortaSplit. It can hold serilisation and cleaning tablets for AC condensate. This may help prevent the P1 error which is caused by clogging of the condensate pumps filter. Regularly check on the state of the…
When storing away the Midea PortaSplit, the units can be neatly stacked but the tube goes everywhere. This hook makes it possible to keep the tube in check. Due to the way that the loop of the tube works together with gravity, the tube…
Midea PortaSplit Schlauchdurchführung für Siebdruckplatte 12mm und M5 Schrauben Moosgummi Selbstklebend 9mm x 6mm als Abdichtung
Earlier manuals recommend cleaning the condensate tray with AC cleaning tabs. However the PortaSplit doesn't really come with an ideal location to put these tabs - one might be able to squeeze them in behind the plastic to the left and…
Made some modifikations to the original design so you can use both sides without a gap between and also i create a 125mm Adapter. Please use the original design adapters if you need differnet size, they will work here too. Also the small…
Allows Roto roof windows to be locked in a wider open position, e.g., for the hose feed-through of a Midea Portasplit. Simply snap them on; they can't fall out when the window is locked. Caution: In heavy rain or windy conditions, the…
English: An attachment for the Midea PortaSplit to distribute cold air into multiple rooms using a 150mm exhaust hose. Thanks to the two openings with an adjustable flap, you can easily vary how much air flows out directly, allowing you…
This is a replacement part for the original drainage fitting, which broke on my unit. During the winter, I noticed water dripping down the outdoor unit. Upon investigation, I discovered that ice had clogged the drainage adapter (probably…
Safety Notice Always ensure that the outdoor unit is securely attached to the steel cable provided by the manufacturer. This is a critical safety feature to prevent the unit from falling. This model is a custom-designed support foot for…
Midea PortaSplit Fenster Abdichtung
For my Window Sill, the original PortaSplit mount does not work, as the sill is far too deep. In order to still use the original mount, I designed different feet, so the mount can just rest ontop the sill. For my Windowsill, the distance…
Hier ist mein Ablauf für die Außenteile: Die Magnete sind 20x6 mm groß und werden mithilfe von M4-Schrauben Senkkopf und Gewindeeinsätzen (Inserts) fest verschraubt.
Weil ich nur Ständer finden konnte die gerade waren, ich aber (ähnlich wie bei einem Ständer fürs Handy) gern einen schrägen Winkel hätte, hab ich etwas neues entworfen. Da meine 3D Design Skills noch ziemlich am Anfang stehen, ist es…
This is a custom-designed replacement window lock bracket for the Midea PortaSplit portable split air conditioner. The original white holder did not match the look of our dark window frames, so I designed this version. You can print it in…
for lack of a better alternative, modeled some kind of shield to close the biggest gap on my Velux skylight while the Midea Portasplit is mounted. Still requires some work on the sides for a better seal. Fusion file available as download.…
Parametric Hose Pass-Through Clamp for Portable AC (PortaSplit / Midea) A two-piece parametric clamp designed to route the flat oval exhaust hose of a portable air conditioner (Midea PortaSplit) cleanly through a window panel or plywood…
This is a backcover replacement for your Midea Portasplit. I made this, as I still have warranty on mine but also cannot let it pump the condensate outside. My neighbours don't like getting wet. :) This saves you from drilling your own…
A set of feet that lifts the indoor unit by 40 mm, plus a matching tray with 2.9 litres capacity. Together they probably let you run the unit off the indoor water port overnight without emptying anything, depends on the humidity. Like a…
Fitting hose/air duct ring for the great design https://www.thingiverse.com/thing:7366324 by JanHendrix. Maybe also known from https://www.reddit.com/r/MideaPortaSplit/comments/1u0gwah/midea_portasplit_200_mm_schlauch_adapter_gratis_d/…
Because of the compressor in the inner Unit, there is some vibration, which gets transmitted on my wood floor, so I quickly designed some moulds to cast silicone feet. They use similar dimensions as those included silicone Rings that are…
This is a drip cup for the Midea Portasplit I made to fit perfectly when the indoor unit is put on a 8 cm height trolley. Note: The trolley I use on the pictures is the one from Leroy Merlin France ref. 86233122. How to print Use PETG for…
Adjustable legs for an outdoor platform. The legs are designed to rest against a windowsill. The ideal materials are PETG, ASA, and ABS. I recommend printing the threaded legs at 98–99% of their actual size so they can be screwed together…
This is a door mount for your Midea PortaSplit designed specifically for the Hoppe sliding doors often found in German “Neubau” apartments. Fits the bottom sliding contour perfectly and is held in place strongly by the two pins that come…
This is a spacer designed to fit over the normal window bridge fitted to Andersen sash windows. It provides an improved, more solid fit for the Midea PortaSplit air condition external unit window mounting plate. I printed in PETG but…
This remix is based on the original Back cover for Midea Portasplit by unruhestifter . I added an 11 mm hose hole to the right side of the upper part of the split back cover. This version is intended for installations where the condensate…
Gedruckt in ASA. Ich hatte noch Alu Vierkant eines anderen Projekts über: Kantoflex Vierkantrohr: 23,5 x 1,5 mm https://www.bauhaus.info/quadratrohre/kantoflex-vierkantrohr/p/10521819 Eckverbinder:…
This clamp helps you keeping you window or door fixed while you use a portable split AC like the Midea Portasplit. I printed it in PLA, but PETG or similar would certainly work as well.
When storing away the Midea PortaSplit, the units can be neatly stacked but the tube goes everywhere. This hook makes it possible to keep the tube in check. Due to the way that the loop of the tube works together with gravity, the tube…
These are the 3D Files for a Portasplit window seal. More infos here: https://www.reddit.com/r/MideaPortaSplit/
Safety Notice Always ensure that the outdoor unit is securely attached to the steel cable provided by the manufacturer. This is a critical safety feature to prevent the unit from falling. This model is a custom-designed support foot for…
