1 / 5
Core One INDX Founder's Edition Nozzle Seal Holder for XL spare parts - Heat Insert Edition — image 1
1 / 5

Core One INDX Founder's Edition Nozzle Seal Holder for XL spare parts - Heat Insert Edition

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a nozzle seal holder for the INDX FE frontplate made for XL nozzle seals.

Rating
0 / 5
Likes
6
Downloads
11
Makes
0
Views
227
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Since the spare part supply is not stablished and nothing can be ordered officially as of now, I was searching for an alternative. The Prusa XL nozzle seal silicone sleeves are the same as the ones delivered with the INDX FE. The metal strip is different. The XL version is 5.5mm longer than the FE version.

https://www.prusa3d.com/de/produkt/parking-plate-set/

Mine are those 5mm longer than the original ones, so that the seals are at the same place and length.

Oh and the whole "screw in plastic" annoyed me. So I made it for Ruthex M3x5.7 heat inserts.

https://www.ruthex.de/en/products/ruthex-gewindeeinsatz-m3-100-stuck-rx-m3x5-7-messing-gewindebuchsen

The seals can be mounted with the original screws. I changed them to M3x5. That's enough...  Original screws will still fit without any problems.

The holder is secured with original screws to the front plate.

Be aware: FE frontplates and Prusa first batch frontplates are different. FE holes for the holder are closer together.

I think I will make a second model fitting the prusa frontplate. Just in case...


Examples are printed with PETG-CF, 0,2mm Struct, 25% 3D Honeycomb and 5 perimeters.

Prusa suggests for their version similar settings. So... Have fun!

Btw. since they are shorter, they are a little bit stiffer. Don't think it matters. My Finger'M'Meter doesn't complain.

Tags