Counting matching models…
Just a simple hex tile people can print to honour Sanjay, one of the co founders of E3D who passed away on 11/27/21. Assets include Fusion360 and STEP files should anyone wish to modify to fit a hex tile pattern they already use. Gcode…
This is a set of different supports and braces that can be used to prevent sagging of RTX 4080 & 4090 Founders Edition GPU's in the FormD T1 v2 (and v2.1). The two braces (short & long) attach to the case spine and provide support for the…
I needed to mount my 7 inch touch screen to my prusa enclosure (v2), so I designed this case with 90° tilted mounting mechanism. Mount the base plate to the lower lack table, either left or right (your choice). Use the power cable whole…
Gehäuse für Sunfounder 7 Zoll DIY Display mit HDMI Anschluss. Am Gehäuse-Oberteil ist im Layer 37 (bei 7,6mm) ein Pause zu generieren um die Muttern (M3) einlegen zu können. Gehäuse-Unterteil wurde in der Mitte etwas dicker gedruckt…
Display stand that allows the Robosen Optimus Prime Founders Edition to stand up while powered down. Modeled in TinkerCAD and then printed on an Ender 5 for the base and Elegoo Mars 3 Pro for the uprights. Some sanding and finish work…
Use these pieces to add more challenge to HedronStack! If you haven't seen HedronStack go check it out . Simple and elegant all at the same time. It is definitely a contender with my vote for the balancing game contest! These pieces break…
INDX founders plaque magnet holder - use two Ø10x2 magnets. Enable supports under the magnet slots to test PETG on PLA supports or choose no support version
Monument to Founders of Kyiv Figures Depicted The legendary siblings: Kyi , Shchek , Khoryv , and their sister Lybid . (Kyiv is named after the eldest brother, Kyi). Official Name Pamiatnyi znak na chest zasnuvannia mista Kyieva…
Hi I built my Core One before @ooishoo published their screw organiser but it would have saved a lot of effort. So for the INDX FE build I was looking for an equivelent model, I made Core One INDX Conversion Kit Screw Organizer (for…
This is a modification of an Nvidia 30-series ITX gpu. It is tested and working albeit with a small temperature penalty of a few °c compared to the stock fan shroud, but runs quieter thanks to the Noctua fan. This is more meant as a style…
11mm Schlauchanschluss Hydration
case for sunfounder TS7 touch screen 7 inches
Based on the SunFounder 10.1 Touchscreen display .
I needed a case for my Pi 4 and my Sunfounder 10 screen. I designed a model of the screen which I used for design. Its included for use in your own desing. I used it to create a switch assembly to move the switch motion to the front. I…
Test Tube Holder And Cover For Founding Queen Ants 16mm X 150mm Test Tube Queen Ant Founder. Used these Test Tubes https://amzn.to/4eS5PuB
General Details I've included two models - one that uses heat-set inserts and one that threads into plastic. The heat-set inserts are preferred, but you do you. My inserts are 4.7mm in diameter and 5.6mm tall so that's what the model is…
Designed for this: https://www.amazon.de/-/en/SunFounder-Raspberrry-1024%C3%97600-Capacitive-Raspberry/dp/B08VNPYQ7Y/ref=sr_1_9?dchild=1&keywords=sunfounder&qid=1628270600&sr=8-9 Includes an articulating mount for both 2040 and 3030…
This is a mount for the SunFounder 7 Inch Raspberry Pi Touchscreen for 3030 aluminum extrusion. Used here on my Ratrig 3D Printer. It can be mounted in 4 different orientations for easy positioning and then full tilt. You will need two…
This is a case enclosure for the clicks keyboard phone case. This was modelled from a iPhone 14 pro founders edition. Merge this model with a phone case in the prusa slicer and to get a full phone case working with the clicks keyboard. Be…
Based on Pooch's original Sanjay Mortimer E3D Founder Commemorative Hex Tile, and with a little help from Fixumdude, I wanted to memorialize Sanjay and his legendary V6 hotend with a unique snow flake. While never near the holidays, it…
Just a remix for all the 6x2 magnets that I have lying around. If needed any adjustments, happy to make them.
Inspired by Chris Bowring 's holder, I made my own version which uses two 5x2 mm magnets inserted from the back. It is very low profile and uses barely any filament.
Crudely edited the original to split into parts, for easier printing https://imgur.com/a/lv9Fjx2 Post-Printing Category: Electronics
I have updated some of the items, specifically the Arduino Assembly Board again, also strengthened the internal walls of the box and shelves and increased the thickness of the hinge walls. I decided to make an electronic toolbox as a…
Sunfounder picar x Chasis replacement
Last Updated 09Sep19 - Added a "standalone" version for the bottom-half wish doesn't require a Sunfounder Acrylic case. The file is called "Mega 2560 Standalone Case - bottom.stl" Need M3x5 screws to mount the Mega 2560 to the…
Reploaded from Thingiverse. Designed by Wismgari. I had a really hard time finding a way to mount this screen so maybe this can help someone else. Also note this can be used to mount the screen horizontally as well as vertically. Copy of…
Use the text feature in your slicer to put descriptions of the tools. Probably only will work with the founders plate.
cover for touch screen sunfounder TS7 with case https://www.printables.com/model/589539-case-for-sunfounder-touch-screen
PCB protection for Sunfounder 10,1'' Raspberry Pi Touchscreen. I managed to destroy the PCB. Fortunately Sunfounder was so kind to send me a new PCB. In order to prevent this from happening again I designed and printed this model. I used…
I took Pooch's great original file and split the border to a separate piece so that it can be printed in multi color with the MMU2 The .3mf file should work for your MMU2 profile. I scaled mine up to 150% from the original design. Thank…
I took Pooch's great original file and split the border to a separate piece so that the border can be printed in a single color without a multi-material print. There is no clearance between the two parts and this creates a good friction…
The Bumper for SunFounder Picar X. Custom-designed and serves as a protective bumper for the front part of the robot so wheels are protected from bumping into objects. It can be used in place of the front line sensor, or alongside it if…
I had a handful of 6mm magnets kicking around after building the OneTop (great model BTW) and wanted a magnetic mount for my INDX FE tag. The magnets are a very tight fit but work for my printer calibration. YMMV. The magnets sit proud of…
Stop feeding ants by just placing your kitchen trash bin directly on the floor! If you are like me and tired of the battle with ants in your kitchen, here's something I hope can help all of us win the fight. The photo shows it upside down…
Minimalistic ESP32 Camera Extension Module Case (Sunfounder Starter Kit) A clean case for your ESP32 board with the camera module from the SunFounder starter kit. No frills, no fuss — just a snug little home that keeps your board safe…
I have a couple of these SunFounder Raspberry PI monitors as display screens, but the supplied stands were too short and tilted the monitors back too far so I made this replacement. Fits this screen…
I wanted to print KingNothings INDX founders plaque magnet holder, but I only hat 5x2mm magnets here. So I remixed his model to make 5x2mm magnets fit. Thanks to KingNothing for his work!
Founders of Teotihuacan Parametric Insert This is an insert for the game Founders of Teotihuacan It uses the amazing The Boardgame Insert Toolkit You can find the source (and latest version) here You need one resource box, but in order to…
Added magnet pockets on the bottom of the object, designed for the following magnet dimensions – Diameter 6.4mm, Length 1.6mm. I used Magcraft neodynium rare earth magnets specifically. They snap fit in extremely snug, with these magnets,…
First, a shout out to the following creators whose GPU support models saved me a lot of time since they already had modeled the front panel hole locations. unknow1assassin | Printables.com aeberbach | Printables.com This is a GPU support…
Remix of the cardholder of Founders of Gloomhaven Board Game Insert by garbled - https://www.thingiverse.com/thing:4689877 I wanted to separate out the cards a bit more for an easier setup. Enjoy! Print Settings Printer Brand: Prusa…
These are ears featuring the Founders Statue and MK castle. These are printed at .2 layer height with ironing to smooth the surface. Also for these a head band was purchased and the ears were super glued on.
INDX Founders Plaque 20x6x2 magnets
Making the tweak was pretty simple (thank you for doing the hard part, sillyfrog). I have printed and tested these updated items, I have not printed the rest of the organizers and check fitment in the box yet. I'll update this thing with…
Low profile Founder Edition Tag which accepts 6x3mm round magnets. Prints in under 8mins
A Remix i used for my 2x5x12 Magnets
Since the spare part supply is not stablished and nothing can be ordered officially as of now, I was searching for an alternative. The Prusa XL nozzle seal silicone sleeves are the same as the ones delivered with the INDX FE. The metal…
INDX Founders Plaque Magnet Holder / Mount - use two Ø10x3 magnets. Like the original project file, I also enabled supports under the magnet slots to test the PETG model using PLA supports, but supports are optional.
Just a remix of the founders plaque holder for the magnet size I have and maybe the ones you have too? Supports 6 x 2 mm magnet discs. Recommend painting supports onto the underside of the magnet holes. There's a tiny bit of clearance on…
This is a simple STL file for the Fusion Hat+ from Sunfounder. It may be useful in the design of robotics or enclosures.
Hello! Thank you for taking the time to view my model. This is an easy print, easy assemble simple case for you to conduct bench top experiments and maybe robot prototypes. There are ports for all GPIO and others, a nice chassis fan…
INDX Founders Plaque for 10x1.5 magnets (2x). Prints in about 8 minutes without support. Magnets placed from the inside and tag places on top. I've created this all myself in Fusion360, but credits to KingNothing's version which gave me…
This is a very simple holder designed in FreeCAD for the small numbered plaque that came with the Founders Edition INDX kits. This is designed for 6x2mm magnets. Easy to print in solid color, or even multiple colors! I set the perimeter…
This is a remix of the original INDX Founders Plaque Magnet Holder , with some adjustments for better fit and plaque retention. The holder is designed to fit my INDX Founders Plaque, measuring 57.2 × 19 × 1.6 mm. Improvements Hexagonal…
