No-Glue WDT Tool for Espresso | Uses Standard Toothpicks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 3-part WDT tool for espresso that uses standard wooden toothpicks instead of specialty needles. No glue or hardwa
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
A simple and practical WDT (Weiss Distribution Technique) tool designed for espresso preparation using standard wooden toothpicks.
The tool consists of three easy-to-print parts and requires no glue, magnets, screws, or additional hardware.
The top cap securely locks the toothpicks in place while still allowing them to be easily replaced whenever needed.
Designed with simplicity in mind, making it inexpensive to print and quick to assemble.
Features
✔ Uses standard wooden toothpicks
✔ No glue or hardware required
✔ Replaceable toothpicks
✔ Simple press-fit assembly
✔ Lightweight and filament-efficient
✔ Beginner-friendly print
Printer:
• Any standard FDM printerMaterial:
• PLA
• PETG
Layer Height:
• 0.20 mm
Walls:
• 3
Infill:
• Recommended 5–15%
Supports:
• none
Assembly:
• Insert the toothpicks into the body and press the top cap onto the center post. The cap holds the toothpicks securely while allowing easy replacement without glue.
💕I'd love to hear your feedback! If you print this model, please leave a comment and let me know how it worked for you. Suggestions for improvements are always welcome.

