1 / 2
SpeedyBee 55A/60A 8bit ESC raised insulation plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 30x30mm insulating plate made specifically for SpeedyBee ESCs that have thick capacitors near the frame.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This insulation plate is made to protect the bottom caps on larger 8bit SpeedyBee ESCs, by keeping them from making contact with your frame.
Hole distance is 30mm. Plate is square.
Print in ABS or TPU, hot so that layers are really bonded.
This has saved me a few times, as I've found the supplied gummies to be too soft to keep the ESC from hitting my frame in hard crashes (ESC even went through the plastic once, hence it is now thicker).
Cheers!