1 / 6
Toyota 2GR-FE 3.0" intake - add OEM resonator 17893-0P090 — image 1
1 / 6

Toyota 2GR-FE 3.0" intake - add OEM resonator 17893-0P090

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Augment your 2GR-FE aftermarket 3.0" intake to add back the OEM resonator to clean up the MAF data

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
68
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Background

I have a 2GR-FE 3.5L V6 engine conversion in my Toyota SW20 MR2 with a modified RAV4 ECU, 3" velocity-stack intake (older version of the FMW MAF tube) a 6" cone filter, random silicone couplers, and a generic 3" ID 30° bent aluminum pipe. With exhaust headers, a relatively open muffler, and a 7400rpm redline, the engine sounds amazing! 

Aftermarket intakes generally eliminate OEM resonators. In the 2GR-FE application the resonator [17893-0P090] acts to smooth out the MAF data rather than deaden the wonderful V6 sound. Cleaner MAF data can potentially lead to a smoother running engine and more predictable throttle response. So of course I wanted to add the resonator to my car.

Wilhelm Raceworks used to make a 3" silicone elbow to match the 3" FMW MAF tube which allowed re-using the OEM resonator among other benefits. But that was 5 years ago and now only a 3.5" part is available.  So my choices to incorporate the OEM resonator are:

  1. upgrade to a 3.5" intake which adds expense, weight and no performance benefit unless I spend thousands on cams, valve springs, and a new ECU

  2. piece together something with off the shelf parts

The parts

The problem I found is that the resonator tube is ~28-30mm while off-the-shelf 3" silicone "tee" parts have ports that are 1" (~25mm), 1-3/8" (~35mm), or 1.5" (~38mm).

So my idea was to use a 3" tee with a 1-3/8" or 1.5" port and create a 3D-printable part to fill the gap between the opening and the oddly shaped tube part of the OEM resonator [18793-0P090]. I created two versions which should work with most generic 3-ply or 4-ply silicone tees like these:

The specific brand I used was TuCool 76mmx35mm which seems to be out of stock currently. But I believe all the made-in-China silicone hose vendors are using the same molds to create these universal parts.

Print settings

  • TPU (95A) or similar semi-flex filament

  • manual painted on organic supports for the central ring (see sample .3mf file)

  • 10% zig-zag infill - any more and the part may be too firm

  • 0.4mm nozzle: 3 perimeters | 0.6mm nozzle 2 perimeters

Tags