Counting matching models…
This is a scaled flyable micro version of the ASW20 sailplane from Schleicher. The model was created to be lightweight and printable in normal PLA. Because of it's lightweight behaviour it's a little bit fiddly to get it together properly…
I made this insert to secure the corners of my wiper cowl since the original mounting was broken and it was causing wind to get under my cowl and cause it to rattle. The cap just press fits on top the insert to prevent water from getting…
DESCRIPTION: I made this to be as accurate of a replacement for the original window vents as possible maintaining both the aesthetic and functionality while ensuring it had 3D printability. The original vents are designed with rubber…
This is a bracket that sandwiches between your steering wheel hub and quick release hub/steering wheel to remount your cruise control stalk. This was designed with a Works Bell Rapfix Short Hub (520S) so I can only guarantee fitment for…
Print with the front of the tooth down on the plate. I just printed these in PLA and they have held up great.
A plug must be removed from the bumper to fit perfectly. Cut a hole on the wheel arch and screw the other part on with the cap. Designed for 60mm wide pipes.
Ashtrays on SW20s break all the time so here is a replacement. It retains all functionality and space of the original ashtray including the spring that keeps the lid sprung closed. I have full single-piece lid files but I recommend…
black cap in photo is the original, white is the printed. It is my first time designing something so it may not be prefect but it works
I would recommend scaling it up by 1% or 2% if it isn't fitting correctly. Category: Automotive
You may have to split the part in the middle in your slicer, depending on your printer. This will not fit all fire extinguisher brackets, so you may need to change the hole location depending on your bracket.
Switch shroud for SW20 MR2 instead of the ash tray. you have to tap the the back holes where the ash tray was mounted.
Intro I tried Shadcast's part but had trouble with the screws. So, I designed from scratch mimicking Alex Wilhelm's design where the rubber bumpers fit in the OEM location and use the 12mm boss screw-holes from the original rain guard. v2…
The SW20 MR2 (1990-1999) front door has three mounting holes for the lower speaker. The holes are evenly spaced on a ~155mm circle. This adapter ring fits most 5.25" speakers that attach with 4 screws. Required hardware: 4x M4 x 12mm…
I augmented Mitynerp's original model to have the cupholder a few centimeters towards the left which was more comfortable for me. The model with the cup toward the right is just a mirror image of my LH design. Recommend printing with…
I modified this model so it has a debossed logo to make it easier to print.
This is an extended kick panel fuse cover for a '91-'99 Toyota MR2. This cover provides enough space to use a fuse tap on one of the kick panel fuses. I did this for wiring my AiM digital dash and tapping into the 12V power via the…
Are your sun visor mounts in your MR2 (SW20) cracked from UV exposure? Print these! Use a high-temp material such as ASA/ABS, or Nylon. Print with solid infill, 4 perimeters. If you can, use a carbon or glass fiber filled filament, these…
Like many SW20 MR2 owners, as I stripped my car down for restoration, the fog lamp screws were seized in place. Removing the lights meant a couple of the mounting tabs on the lights where damaged. Rather than attempting to repair the…
This is a clip for the engine lid of the Toyota MR2 SW-20. The original clip breaks easily so I made this replacement. I printed it on it's side with support material. The circular opening should be facing sideways while printing. I…
The middle part which connects to the visor can be removed, the two screws fixes it in place nicely. Category: Automotive
Delete brackets to attach the rubber stops after the rainguard has been removed from the engine lid. Use whatever screws you have laying around. This was printed in PETG and has lasted with engine bay temps.
I'm not sure if JR's cap was intended for the armrest but it did not fit my current hardware. I modified his cap to fit the screw pictured. I also recreated a sleeve that goes into the armrest. My car only had one armrest cap/sleeve combo…
I made these to attach a custom rain shield to my TCS Motorsports strut brace. I assume these should work on any TRD rep/style strut tower brace. Print out of high-temp resistant material such as ASA/ABS, Polycarbonate, or Nylon. I…
This is a model of a 1991 Toyota MR2. It is printed in 3 parts I printed it on an Elegoo Neptune 4 plus. The three sections roughly measure 320 mm from end to end there is enough tolerance in the tabs that they should be able to be scaled…
this is a clip for the JDM MR2 to hold the bottom of the rear USA Style license plate. Made for a 92 JDM import so it should fit any JDM SW20 MR2 that need a USA size plate
Thought id share this simple mod, use your old lense and purchase this two items: https://www.aliexpress.com/item/1005003162062596.html https://www.aliexpress.com/item/32593154120.html
About the design This drop plate combines aspects of the B&M plate (circular opening) and various generic drop plates (rectangular opening) resulting in an oblong opening. This approach minimizes the risk of interference when used with…
This is the seatbelt rod that protrudes from the driver side seatbelt mechanism and often breaks when taking you interior apart . This was scanned from a broken part glued together, however pinpoint accuracy is not required as this fits…
My 1991 MR2 non-turbo had a large intake resonator taking up valuable engine bay space. I removed it and replaced it with this contoured ~44mm plug. The plug approximates the shape of the main ~65mm intake tube to minimize disruption to…
A replica of Toyota bushing part number 90386-12022. This is the black bushing that allows the bell crank linkage on top of the E153 transmission to pivot freely and has probably disintegrated after 30 years contributing to sloppy shifts.…
This is a replacement handset retainer latch for a 1990s Conair clear/see-through slimline telephone. The original plastic piece was missing, causing the handset to slide off the base when wall-mounted. The press-fit post extends 8mm…
Print top flat side down, use textured plate as desired. Recommended to make out of heat resistant material like ABS/ASA as softer materials may warp in summers
The Magsafe ring I salvaged from a broken PopSocket measures as follows: OD 54mm ID 46mm thickness 2.25mm The model adds 0.2mm to these dimensions to provide some extra room An alternate model adds a 41mmx4.75 cylindrical cavity to…
You could spend $25-50 on anodized aluminum bushings, or Print 8 copies of this part. In general, parts like these should be manufactured with CNC Aluminum, Delrin, or HDPE using the .dxf file. For FDM 3D-printing an .stl file is included…
I augmented Mitynerp's original model to have the cupholder a few centimeters towards the left which was more comfortable for me. The model with the cup toward the right is just a mirror image of my LH design. Recommend printing with…
This is a replacement handset retainer latch for a 1990s Conair clear/see-through slimline telephone. The original plastic piece was missing, causing the handset to slide off the base when wall-mounted. The press-fit post extends 8mm…
This is the seatbelt rod that protrudes from the driver side seatbelt mechanism and often breaks when taking you interior apart . This was scanned from a broken part glued together, however pinpoint accuracy is not required as this fits…
Delete brackets to attach the rubber stops after the rainguard has been removed from the engine lid. Use whatever screws you have laying around. This was printed in PETG and has lasted with engine bay temps.
A replica of Toyota bushing part number 90386-12022. This is the black bushing that allows the bell crank linkage on top of the E153 transmission to pivot freely and has probably disintegrated after 30 years contributing to sloppy shifts.…
Stand for SW20xx transceiver with reclining legs. It is installed instead of the standard legs. Подставка под трансивер SW20xx с откидывающимися ножками. Устанавливается вместо штатных ножек.
![Toyota MR2 SW20 & AW11 [1984-1999] shifter drop plate and solid bushings](https://media.printables.com/media/prints/074e6ccb-05c3-4210-b1fe-f2011dbfe043/images/13103209_6b3a8789-c761-4590-80ef-31ba65bdf120_6fd0e219-6acc-45e9-85bf-59d25a48aa26/img_20260608_142536378_hdr_ae.jpg)
![Toyota MR2 SW20 & AW11 [1984-1999] Shifter plate solid bushings](https://media.printables.com/media/prints/892a63d1-66cd-4d90-9d5f-fc62915b2c85/images/14336926_92696091-4976-41c8-aa72-f01d875bca82_aee4d8d5-8157-4769-a7bd-e78632a6ca5a/img_20260902_172448610_hdr_ae.jpg)
