1 / 8
MR2 SW20 seat belt rod lever - driver side USDM
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The seat belt lever that often breaks when taking apart your interior
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is the seatbelt rod that protrudes from the driver side seatbelt mechanism and often breaks when taking you interior apart . This was scanned from a broken part glued together, however pinpoint accuracy is not required as this fits fine when printed. You may have to play with orientation on this print, but printing flat is recommended at 100% infill using a heat resistant filament like ABS or ASA .
This is from a 91 Turbo MR2, but is likely to work on later models as well.
