Toyota MR2 SW20 & AW11 [1984-1999] Shifter plate solid bushings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace the rubber bushings with solid mounts to firm up the shifter feel
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
You could spend $25-50 on anodized aluminum bushings, or Print 8 copies of this part.
In general, parts like these should be manufactured with CNC Aluminum, Delrin, or HDPE using the .dxf file. For FDM 3D-printing an .stl file is included and the following settings will work OK:
PETG, ABS, or ASA OK (PA11/Nylon, PC-blend, PP-CF, PETG-CF preferred)
0.2mm layer height
6+ perimeters (0.4mm nozzle) or 4+ perimeters (0.6mm nozzle)
5+ top/bottom layers
50% gyroid infill (100% rectilinear/monotonic infill OK but won't improve strength)
Install tips: Superklasse Shifter parts install guide (https://archive.is/KM1EA)