1 / 1
Toyota MR2 SW20 & AW11 [1984-1999] Shifter plate solid bushings — zdjęcie 1

Toyota MR2 SW20 & AW11 [1984-1999] Shifter plate solid bushings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replace the rubber bushings with solid mounts to firm up the shifter feel

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
17
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

You could spend $25-50 on anodized aluminum bushings, or Print 8 copies of this part.

In general, parts like these should be manufactured with CNC Aluminum, Delrin, or HDPE using the .dxf file. For FDM 3D-printing an .stl file is included and the following settings will work OK:

  • PETG, ABS, or ASA OK (PA11/Nylon, PC-blend, PP-CF, PETG-CF preferred)

  • 0.2mm layer height

  • 6+ perimeters (0.4mm nozzle) or 4+ perimeters (0.6mm nozzle)

  • 5+ top/bottom layers

  • 50% gyroid infill (100% rectilinear/monotonic infill OK but won't improve strength)

Install tips: Superklasse Shifter parts install guide (https://archive.is/KM1EA)

Tagi