PRUSA MINI+ X Axis Belt Tensioner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tension the X axis belt on your PRUSA MINI+
- Rating
- 4.667 / 5
- Likes
- 97
- Downloads
- 444
- Makes
- 16
- Views
- 2,323
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Prusa Mini+ upgrade,
Now you can adjust belt tension on Mini+ whilst still having x axis skew correction,
Based on the R8 upgraded version x end,
Just assemble as per the vanilla x end, but install the additional 2 pieces (threaded screw and guide) to adjust belt tension.
See photos for assembly
27/05/2022
Updated SLIDE part, as it would slide out of position :)
10/07/2022
Updated orientation of screw and nut in Slide
Updated clearance on Slide (foul condition when x was between 4 and 0mm)
01/01/2023
Updated Screw Diameter
Printed in PLA+ 100% infill,
PETG preferred if available
Print settings
0.1mm /0.2mm
No supports!!!!!!!! see photo for correct layout
100% infill
0.4mm nozzle