PRUSA MINI+ X Axis Belt Tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tension the X axis belt on your PRUSA MINI+
- Ocena
- 4,667 / 5
- Polubienia
- 97
- Pobrania
- 444
- Wydruki
- 16
- Wyświetlenia
- 2321
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Prusa Mini+ upgrade,
Now you can adjust belt tension on Mini+ whilst still having x axis skew correction,
Based on the R8 upgraded version x end,
Just assemble as per the vanilla x end, but install the additional 2 pieces (threaded screw and guide) to adjust belt tension.
See photos for assembly
27/05/2022
Updated SLIDE part, as it would slide out of position :)
10/07/2022
Updated orientation of screw and nut in Slide
Updated clearance on Slide (foul condition when x was between 4 and 0mm)
01/01/2023
Updated Screw Diameter
Printed in PLA+ 100% infill,
PETG preferred if available
Print settings
0.1mm /0.2mm
No supports!!!!!!!! see photo for correct layout
100% infill
0.4mm nozzle