T-Handles 6mm Nuts & Bolts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nut & Bolt T-Handles (6mm) for weed eater or whatever
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 49
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
T-Handle for nut
I needed a T-Handle nut for tightening the attachment on my Ryobi Weed Eater.
Requires a 6mm nut (10mm wrench size) from the hardware store. I found one at the local ACE Hardware.
Print the T-Handle with 8 walls for strength.
Press fit the nut into the T-Handle.
UPDATED: 5 Aug 2026, Included a T-Handle for bolt.
Requires a 6mm bolt (10mm wrench size) from hardware store to insert into the bolt T-Handle. (55-60mm for the standard recess) (40-45mm for the deep recess)
Print using 8 walls and support.
Press the bolt into the back of the T-Handle.
Place a washer and nut onto the bolt and draw the bolt into the T-Handle, by tightening. (Ensure proper seating of the bolt head into the T-Handle as it is being tightened)