Komplement Divider 35cm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A divider that can be inserted into a Komplement mesh drawer of Ikea. It fits in a 35cm wide drawer.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A divider that can be snapped into place in a mesh komplement drawer of ikea (35 cm width)
The model is designed such that it can be printed with minimal supports. It fit in a CORE One+ printer. Would recommend to use a brim during printing (had some warping issues which shows visible lines/imperfections in the final product)
The model is created using onshape and can be copied here: https://cad.onshape.com/documents/dce4ad07fa0e05e1935c6c4e/w/bf527043645ae042a1a79d75/e/63a5db505476adc6f1b0c029
This contains a divider with a wavy middle section but also a divider with a "blank" flat middle section that can be used to create other shapes/textures. The outer rim and the pins of the models are identical.