Komplement Divider 35cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A divider that can be inserted into a Komplement mesh drawer of Ikea. It fits in a 35cm wide drawer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A divider that can be snapped into place in a mesh komplement drawer of ikea (35 cm width)
The model is designed such that it can be printed with minimal supports. It fit in a CORE One+ printer. Would recommend to use a brim during printing (had some warping issues which shows visible lines/imperfections in the final product)
The model is created using onshape and can be copied here: https://cad.onshape.com/documents/dce4ad07fa0e05e1935c6c4e/w/bf527043645ae042a1a79d75/e/63a5db505476adc6f1b0c029
This contains a divider with a wavy middle section but also a divider with a "blank" flat middle section that can be used to create other shapes/textures. The outer rim and the pins of the models are identical.