Minimal Garden Hose Corner Guide and Guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist corner wall guard for garden hoes.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 8
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
Clean and simple corner guard for a garden hose attached to the corner of the wall using two-sided adhesive tape.
Tools Needed:
An adhesive of your choice (Tape, Hot glue, Silicon)
ORTwo-sided tape with 18mm width and 1mm thickness (Recommended).
The model has a 0.8 mm indentation so the object attaches flush to the wall with minimal gap after applying the thick two-sided tape.
Fig: 0.8mm indentation slot for 1mm thick tape.
Printed With
Printer: Prusa Mini+
Printer Overhang Angle Tol.: 45deg+
Material: PLA
Support: No Support
Layer Height: 0.2mm
Brim: 9mm-wide brim for tall prints (Or as needed)
Seam: Hidden at the back of the object (see image below)
Fig: Using Seam Painter to force the seam to be on the back side.
Fig: Print with no brim.
Fig: Printing with a 9 mm-wide brim for taller prints
Feel free to send in feedback!!
Happy Printing!!
Consider Supporting!! Your support will allow me to continue sharing my designs.
buymeacoffee.com/supanut.tho
