1 / 6
Rugged ID case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rugged case for a standard CR80 ID card
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 11
- Makes
- 1
- Views
- 91
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a rugged case for a standard CR80 ID card. It is designed to be bolted together with four m3x8 screws. It provides superb protection along with a rugged modern design. There are 2 designs, one with trapezoidal side slots and one without.
BOM: 4 m3x8 screws
Print Settings:
layer height: 0.1 mm
4 perimeters
8 top and bottom layers
20% gyroid infill
Need supports under lanyard slot