Modular 15mm Rod-Rig System -universal (100% printable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully modular, sturdy, and universal 15mm rod rig system for your camera setup – ideal for videography!
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 33
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Fully Modular: Uses standard 15mm rods, making it compatible with almost any DSLR, mirrorless, or cinema camera (Sony, Canon, Nikon, Olympus, Fujifilm, etc.).
+100% Printable (except 1/4" screw): No need for expensive aluminum rods or hardware.
+Baseplate Included:
+Heavy-Duty: 2 clamp sleeves per rod for maximum rigidity and heavy setups.
+Expandable: Perfect base for follow focus units, lens supports, battery packs, and top handles
🟨 Recommended Print Settings
Screws & Threaded Parts:
--Layer Height: 0.12 mm (Crucial for smooth, strong layer adhesion on fine threads!)
-Walls / Infill: At least 4–5 Perimeters / 40%+ Infill.
--Baseplate & Rods:
Material: PETG or Tough PLA recommended (PLA works too, but PETG handles clamping stress better).
Layer Height: 0.16 mm – 0.20 mm
Wall Thickness: At least 4 perimeters (Wall count adds more structural strength than infill!).
💡 Assembly Tips
Anti-Slip Pads: Add small rubber or silicone anti-slip pads to the top of the baseplate where the camera sits. This prevents camera twisting and protects your camera body.
Camera Screw: Use a standard metal 1/4" tripod screw for maximum security.