1 / 1
2DS USB-C Port Insert — image 1

2DS USB-C Port Insert

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An insert piece to fill in the charge port's lower gap for 2DS USB-C mods.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
93
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Public Domain

Print notes:

  • Slicer settings should prioritize precision. I would avoid fuzzy as it may prevent correct fit.

  • Printed with 0.4mm nozzle.

  • 0.16mm layer height.

  • No adhesion brimming used.

  • You may need to trim away any unevenness from the PLA settling on the print bed.

Assembly steps:

  1. Disassemble the handheld down to the charge port.

  2. With the printed insert, check it fits over the raised post on the underside of the back shell. It should not be too loose.

  3. Put the printed insert between the plastic overhang and the USB-C port.

  4. Now test to ensure the back shell fits with the insert in place then finish reassembly.

Tags