Search results: 3ds

Creality Raptor Case 3Dscan

A 3Dscan of the inside of the case in which the Creality Rapor came.

3DSets Van Warn Winch bumper

I'm continuing my effort to transfer the 3Dsets.com model 14 “Long Max” into an expedition vehicle. As a long-time player of Spintires/Mudrunner/Snowrunner games, i know pretty well, that there is no off-roading without a winch, so I…

Faux LED Bar for 3DSets Landy "ARB" Bumper

A faux led bar for the ARB style bumper by @pruzkumakkoubahadr. I suggest using -.025 Horizontal expansion on both parts for a snug fit without sanding. Enjoy and post your makes!

Ikea Skadis New Nintendo 3DS (non-XL) Parametric Hook (REMIX)

This is remixed hook for Ikea Skadis so it fits New NIntendo 3DS (non-XL) (If you dont use clear case it still would work but you can push model 0.5-0.6mm so it is more snug) Original author: @vinzcenzo

Pulley for 3 screw motor for 3Dsets car

works with 3530 BH power V2 motor

Door inserts for 3Dsets Mercenary Landy kit

can can put inserts into doors from the inside, especially if you messed up bridging and dont want to reprint doors again. :) Mercenary landy kit is on Cults

3DSETS - Bamboo - Ramp mount for the rear gate

I modified this mount design so it can be attached to the rear door

Nintendo DS Game Cartridge Display Stand (DS, DSi, and 3DS)

This is just a simple stand that I created because I couldn't find one with all the features I was looking for. Those features being: a cutout in the front wall to show as much of the cartridge as possible, a support on the back to help…

RC Tires for 3dSets Sakura

These are remodeled 3dSets Sakura tires with aggressive tread for asphalt. They are printed with Siraya Tech TPU 85 on CoreOne. There are four unique tires in the set for Front, Rear, Left, Right.

3dsets mogster reinforced portal gear

I kept breaking the portal gear to wich the tire mounts on my 3dsets mogster. So i added 3 m2x30mm screws (20mm should do it too) to each of them to reinforce it. You have to cut the head off the screw so the tire can still mount. For the…

3DS Circle Pad with improved grip

3ds circle pad with improved grip. comes in 16mm head and 14mm head variants.

Sony Walkman Case for Nintendo 3DS XL

I printed in PLA and ABS on Bambu H2D, both work pretty well and 3DS has enough clearance to tolerate expansion/shrinkage depending on filament. I used the "paint" modification in Bambu Slicer to make it multicolored. Upload into your…

3Dsets Sakura rear lights for LED filament

3Dsets cars are amazing as designed, but with real lights even more. I made a rear lights for Sakura with 2mm slots for flexible LED filament form Aliexpress. It can be bended and freely cut for reasonable price. Print the first two…

From overland 22 pack 3Dsets Ligths mods

Since I needed to use the Mogster 4x4 as an inspection vehicle inside pipes, I had to equip it with additional lights and a camera on the roof to enable remote viewing. Starting from the original roof rack upgrade…

Zugentlastung für Namenslampe T-3DSIGN

Zugentlastung für T-3DSIGN Nameslampe für IKEA KABBLEKA LED Steifen für 15mm x 15mm Öffnung Kann auch zum Ausdrücken / Reinigen der "Kabel Durchführung Öffnungen" verwendet werden.

Klebeverbinder für Namenslampe T-3DSIGN

Klebeverbinder für T-3DSIGN Nameslampe für 15mm x 15mm Öffnung Einfach beim zusammenkleben einsetzen und in der Lampe lassen für optimale Ausrichtung und zusätzliche Stabilität.

Insert for DS and 3DS games

I wanted to make two of these to store Pokemon games, but there wasn't an insert for DS games, so I modified one

3Dsets Sandy's front bumper with slots

made this small modification for easy replacing the front bumper for the Sandy i also increase hole diameter to 2.8mm for easier insertion (original was 2.6 for M3 screws - i guess it is for self lock to resist vibration better)

Cartridge stand for Nintendo DS 3DS games

Hello, Sharing my project of stand for 20 Nintendo DS and 3DS games :) Dimensions: 56 x 176 x 86mm 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…

3dSets Bamboo motor adapter for Hobbywing Quicrun Outer 3530 SL motor

After first building the 3dsets Mogster Overlander I decided to build the Bamboo model 12 as a second model. Since the recommendation for the Mogster was a Hobbywing motor I re-applied that advice on the Bamboo, only to find out that the…

Nintendo 3DS

i made a Nintendo 3DS i hope you like PLEASE comment what you would like me to make

3DSets Mogster Trailer Coupling

A trailer coupling for the Mogster based on the Original U406 Rockinger 227G coupling. As it would be to complex and fragile to FDM print, this coupling is not automatic and uses a small D10x2mm magnet to hold an M2x20mm screw embedded in…

Fixed beadlock rim for 3Dsets

Problem with original is that the hole for the hex axle is 1mm deeper than it should be, I added 1mm of material.

Blank license plate for 3Dsets Sakura and Reaper

Nintendo 3DS Display frame for module + box

This is a frame for the wall where you can display your 3DS games, including the box!

3DSETS MOGSTER pulley for 16T 32P (M0.8) pinion

Since I did not have the required 17T M0.6 pinion at hand and did not want to buy yet another part for the MOGSTER build, I designed a pulley to fit a 16T 32P (M0.8) pinion I did have already. Designed based on the STL from the purchased…

New Nintendo 3ds/2ds xl C-stick Grip

New nintendo 3ds/2ds xl c-stick grip

Peg Board "New" 3DS Holder

This is a simple peg board holder for the new nintendo 3ds (not the XL model).

3DSIMO Kit 2 3D pen body

Modified body for 3DSIMO Kit 2 3D pen. The original body is too big and nozzle is hidden inside. There for you can not see what and where you are doing. This body leaves the nozzle open, easy to see what is happening. This design is…

tiered 3ds case display

Print Settings Printer Brand: Creality Printer: ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20%

Front and rear LED lights for 3DSets RC Jeep Wrangler (Rancher)

FRONT LIGHTS: I used silver filament for the light and black for the shape. Transparent filament for the turn signals. Then I cutted 2 circular shapes from the plexiglass used for the glasses of the model. BACK LIGHTS: I used black…

3DSets Sakura Licence / Number Plate Selection

A selection of alternative licence / number plates for Sakura RC Model Car from 3DSETS. I sliced these in PrusaSlicer with two colour changes, printed on my Prusa MK4. The main body is black, then a couple of layers of white/yellow,…

Gridfinity Nintendo New 3DS XL (LL)

This design holds a Nintendo New 3DS XL with a case.

New 3ds (Small) Custom Faceplates

The New Nintendo 3ds (Weird name, don't shoot the messenger) had a very cool feature where you could swap its top and bottom panels out with ones that had different designs. Since it's difficult/expensive to get your hands on originals,…

Landy ARB front bumper - 3dsets winch & servo guard mod

This is remix from pruzkumakkoubahadr's design "Landy ARB front bumper", allowing to mount 3dsets winch & servo guard

3DSets Landy Wagon Roof Rack for small print bed

This is roof rack for Landy Wagon from FedorSosnin, remixed to fit smaller print bed. Biggest part is 175x156

Quickball with hinge (V1.6), functional button and insert for GBA, DS and 3DS cartridges

This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…

Loveball with hinge (V1.6), functional button and insert for GBA, DS and 3DS cartridges

This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…

Ultraball with hinge (V1.6), functional button and insert for GBA, DS and 3DS cartridges

This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…

Nintendo DS Family Customizabile Stand (for DS/lite/DSi/3DS/2DS etc.)

I like this Nintendo DS lite stand from @baumesfab31as it's really fast to print and save a lot of material. However I prefer embossed design as it looks better in low-end FDM printer when printed in multicolor. Thus, I redesigned from…

Charging dock for Nintendo New 3DS

A fully functional charging dock for the New 3DS! It also comes with swappable plates that you can print in multiple colors. Best of all, this works with most printers, because you simply have to change filament at certain heights. I took…

3DSets - Belt Gearbox D3530/D3542 motor adapter/pulley

Compatible with D3530/D3542 motor with 3 screw, spaced by 16mm, like this one https://fr.aliexpress.com/item/1005006159885118.html Use 3x M2.5x4mm screw directly on motor rotating cage. Print D35XX pulley, Remove integrated support. (red…

3DSets - 5mm metal output for belted gearbox

Use a M5x45 screw with head cuted, or a treaded M5 rod. You need 2x M5 nuts. Print the output pulley and assemble like 3Dsets manual describe. Cut a M5 rod or a M5 screw to have approx 10mm each side. Threaded rod or screw have to be…

3dsets Rancher Stand

This is a stand I designed from the Rancher's “centre of the chassis” STL file using Fusion 360. It negates the volume occupied by that STL to ensure a solid fit. This should be a trivial print, as there are no supports required, no fancy…

3DSets - Landy (and others) - Mod - Metal transmission : shafts, gears and axles

Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…

New Nintendo 3DS Battery Extender (N3DS) Supports Faceplates!!

I made this N3DS accessory to support the expanded 5000mah battery made for the original 3ds. Its a spacer to adapt the battery to the n3ds. snug! this is the battery:…

Nintendo 3DS Card Holder (x12)

Needed a box to hold 12 Nintendo 3DS cartridges.

3DSets - Landy/Rancher/Bamboo - GT2 Belt Gearbox (with metal pulleys)

GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…

3Dsets Rancher - axle extension by 10mm and reinforced

CZ: Úprava dílů pro vozidlo 3DSets Model 2 Rancher 4x4. Zaměřeno především na těžký terén pro expediční vyjížďky. Původní model: https://3dsets.com/product/model-2-rancher-4x4-hardtop/ Rozšířené osy o 10mm na každé straně a zesílené +…

3DSETS Bamboo - stand

Hello i make remix of this model to fit 3dsets bamboo. Only change is make shorter middle part. I print from PLA 10% honeycomb infill and work good with 110mm tires

3DSets Van spare wheel carrier

The Max van is big and rather top-heavy, but with 4x4 drivetrain can still be surprisingly agile in harsh terrain and a good base for “Expedition” style model - especially, when intended as a “support" vehicle, carrying spare parts and…

3DSets Max Van cargo module - spare parts palette

The Model14 long body offers insane cargo capacity, which is extremely usable in the #printedtrophy challenge (where you're supposed to carry all the spare batteries and parts in the car itself), but torturing the car in harsh terrain,…

3DSets Skippy Servohalterung

Servohalterung

Mod for RCelectricparts.com 3530-8 Brushless Motor for 3dsets Buggy Model 7

I wanted to use an RCelectricparts 3530-8 1400 brushless motor, but needed to shorten the spline and adjust the motor bracket. I transferred to Freecad, and modified. Freecad files attached. I kept the 2-part spline as the original, but…

3DSets Buggy Model 7 Switch Holder

Switch Holder for #DSets Buggy (Model 7). I didnt like the original switch holder, too floppy. This one has a recessed area to hold the switch secure. holds a normal 13mm x 21mm x 7.5mm switch. Leaves the switch centered in the skid plate…

Servo Mount and Steering Arm for 3DSETS Buggy Model 7

I didnt like the original servo arm (horn) on the 3DSets Model 7 Buggy, so I made one that uses an off the shelf horn. I had to resize the steering arm to match. Uses the stock arm bearing fittings. This is nice and solid, and won't rip…

2.2/3.0 Rimset for Pro-line Icon Tire on 3Dset Buggy Model 7

I wanted ridiculously oversized tires for my 3DSets Model 7 Buggy, and couldn't find rims I liked. So i came up with these. They are 2-piece rims (for easy adjustment for other tires should the need arise). The were designed for the…

3dSets Sakura Louvered rear side window

This is a Louvered window for the 3DSets model Sakura. Its only one side you will need to mirror in your slicer to get the other side. Category: R/C Vehicles

NIntendo DS/3DS Display

It's better to have support for overhang

Gridfinity 3Dsimo Multipro holder + 3D pen + Soldering Head compartments

Simple storage solution for your 3Dsimo Multipro if you want to sore it in your gridfinity ecosystem

3DSets CV Boots for most 3DSets models

3DSets vehicles are awesome, however the open CV axles have to be greased to prevent wearing out the connection, These boots are designed to protect all the open CV (universal) joints by allowing you to stuff them with Grease and not…

Rancher grill 3dsets

Na fixaci dílu používám trochu lepidla, ale není to nutné.

3DSets Van Warn Winch bumper

I'm continuing my effort to transfer the 3Dsets.com model 14 “Long Max” into an expedition vehicle. As a long-time player of Spintires/Mudrunner/Snowrunner games, i know pretty well, that there is no off-roading without a winch, so I…

3DSets Landy Wagon + Ranger 4Door Rear Link Slider + Brace

Had an issue with my Landy Wagon where my links were flexing when crawling. Sometimes this caused the axle to shift and move the tires into the wheel well causing issues and binding. This is a tool-less, snap-on, solution. These sliders,…

3DSets Landy Radiator Fan Adapter - 40mm fan

Needed more cooling for longer drives. I actually saw somebody post something similar but using a hacked stock radiator. Figured, there's a better way! Enjoy and Post your makes! The fans I used:…

3DSets Landy Wagon Roof Rack with LED Bar

This is a mod that allows you to use this roof rack: https://www.3dsets.com/product/roof-rack-accessory-for-model-4/ on the much larger Landy 4x4 Wagon. You will need at least a 300x300 print plate to print the rack and side rails but I'm…

Faux LED Bar for 3DSets Landy "ARB" Bumper

A faux led bar for the ARB style bumper by @pruzkumakkoubahadr. I suggest using -.025 Horizontal expansion on both parts for a snug fit without sanding. Enjoy and post your makes!

3DSets Rancher Beadlock Tire Lock Ring (2 Options)

My tire kept slipping on my rim with my Rancher wheels and Super Swamper tires. These rings help you "lock" the tire in place. There is also an option to use M3 nuts as weights — 48 per lock ring. Enjoy and post your makes! If you found…

3DSets Wheel Spacer & Rotor

This is a spacer used on models from 3DSets.com (both Landy and Rancher) to move the wheels and tires outward. Making a wider stance and moving the wheels away from the shocks. Giving you more shock options, more potential for…

3DSets Landy Wagon Rear Hi-Lift Jack Mount(s)

Loved @daver18qc's Hi-lift jack https://www.thingiverse.com/thing:3513415 but needed a way to mount it to my Landy wagon from @3DSets. I made two. One is the "full" mount that replaces one of the hinges on your rear door and holds the…

3DSets Upper Shock Mount

I needed a way to mount non pillow ball shock tops onto my Landy 4x4 Wagon from 3DSets. This gives them movement in two axis instead of one. Also included both 5 and 6mm bushings for the eyelets. Enjoy and post your makes! If you found my…

Nintendo DS/3DS Game Box and Cartridge Holder

I am a Nintendo freak. So I made a game box and cartridge holder. If you guys want to remix it to have the game's name on it, go for it. I haven't printed it yet so tell me if there are any problems with it. Print Settings Printer Brand:…

Creality otter 3dscan CAD version

3d scan from DaVinci10 and just made into a CAD file for anyone needing it.

3Dsets metal gear axles for Landy Rancher Bamboo Black Crow

!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…

3dsets bambo Front Radiator Screen toyota & blank

Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2

Game Boy Cartridge for Switch 2, Switch, 3DS & DS

Transform your modern Nintendo game collection into a nostalgic piece of gaming history with this crafted Game Boy cartridge case! A tribute to the iconic handheld that started it all, bringing the magic of the 90's gaming era to your…

3dsets Rancher protective conduit for wires from the tail LED light

I wanted to safely stretch wires from tail LED light to receiver/lights unit. This conduit is placed at the bottom side of the wheel house and connects the side where tail light is installed with interior of the car. The only tricky part…

3Dsets Assembly Organizer

Hi guys This is the 3Dsets Assembly Organizer to help build the models they offer. if you havent tried them yet: 3D Sets – 3D print, build and enjoy! i have 9 models from 3dsets (they are all super fun to print and assemble). The Assembly…

RC 1.9" 105mm FLEX tire inserts (Specially designed for 3DSets Max van )

My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…

3DSETS Reinforced C-HUB (Partially)

Another modification to reinforce good 3dsets models)

3DSETS Beadlock Landy classic rims

I recommend to print it with 100% infill

Ikea Skadis New Nintendo 3DS (non-XL) Parametric Hook (REMIX)

This is remixed hook for Ikea Skadis so it fits New NIntendo 3DS (non-XL) (If you dont use clear case it still would work but you can push model 0.5-0.6mm so it is more snug) Original author: @vinzcenzo

Superball with hinge (V1.6), functional button and insert for GBA, DS and 3DS cartridges

This hole project was made to challenge my ability whit SolidWorks This is a remix and complete redesign of this model https://www.thingiverse.com/thing:1615753 to make the design of inserts easier to be adapted to different situations In…

Redukce na větší kola 3DSets

Redukce na větší kola, děláno pro model Buggy, ale lze použít i na jiné modely. Pro montáž větších kol použijte šroub M3x16

New Nintendo 3DS (non-XL)

Could not finds any fitting stand for my New 3DS since everything is made for XL.So Ive made my own stand.Enjoy!

3DS/DS Cartridge Organizer Gridfinity

Model A compact storage tool designed to fit 12 Nintendo DS and/or 3DS game cartridges. Should be compatible with Gridfinity baseplates, but I have yet to test it. It is a 2x1 Gridfinity part. Credit to Zack Freedman, the creator of the…

3Dsets switch

3Dsets switch reduction for QuicRun 16BL30

rear axle parts for 3dsets differential

material: PLA, PETG layer height 0.2

3Dslashable LEGO compatible bricks

A few LEGO compatible bricks that allow you to create cool sculptures with 3DSlash. If you know someone who loves Lego and Minecraft, this is a collection of things she/he may like. The things are composed of a half-height LEGO brick at…

new 3ds front plate (modified)

This is based off the original and says GAME BOY on the front

New Nintendo 3DS (N3DS) Skadis mount

chopped up Jack P's simple DSi XL Skadis mount in BambuStudio to make a version that fits the New Nintendo 3DS

Tablic RC MP Landy 3DSETS

RC

Nintendo 3DS Charging Dock (Beta)

Nintendo 3DS does not have a reliable charging connector, but it does have a power socket that has some outside contacts for the charge station. I managed to create a simple dock with Pogo pins for charging N3DS. It's made like a box so…

Africa Trophy Bumper with 1/8 Warn Zeon Winch Mount for 3DSets Landy

Modified Africa Trophy front bumper with larger winch mount to fit an RC4WD 1/8 Warn Zeon Winch.

EU License Plate Holder for3DSets Landy

This is a resized license plate holder to fit EU-size rear license plates for the 3DSets Landy

3dsets Bamboo motor mount sqare holes

Remixed original motor mount for a square hole pattern.

3DSets Mudflaps for Toyota, Land Rover and 4wd

Enjoy )

Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com

This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…

3DSets Model19 Torq Motormount for 3536 size ( 34mm length )

I usually use 3536 Outrunners ( eg.Turnigy ) so the Motor Mount provided with the 3Dsets Torq - Model 19 ( Hustle and Megnetic Pack) is to short. I exended both accordingly Printed in Prusament PETG 3 Perimeter 15% Infill - PRUSA MK4S

Chimera Clone (3DSWAY branded) mgn12 x-carriage 11.6mm holes, 13mm apart

I purchased this Chimera clone on banggood. It is sold red or blue. The nozzles are 13mm apart, and the PTFE connectors are fairly bigger than average (11.6mm diameter). Category: 3D Printer Parts