Replacement C-Stick for New Nintendo 3DS/2DS Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement stick for your New 3DS.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 212
- Makes
- 0
- Views
- 1,885
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- GNU General Public License v2.0
This is a replacement part for the C-Stick found on the New Nintendo 3DS/New 3DS XL/New 2DS XL handhelds.
Things you need to be aware of:
- You need to remove the old C-Stick first. This can be done by disassembling your 3DS, or cutting the rubber off with a crafting knife.
- The stick can tilt slightly and will stay in a tilt (making certain directions unusable) unless you tilt it back. This may be fixed by applying glue to the inside.
- It's not advised to print the rounded version on an FDM printer. If you are going to do it anyway, print at 0.05mm layer height.
- Print the model upside down. This will avoid having headaches trying to remove the supports.
Print it with a brim and it should turn out fine.
This is my first CAD project, so I might improve this later on (if I can).
I used FreeCAD to design it, with the aid of models created by limoncello-mozzarella and UndecidedUser, their models are listed respectively:
https://www.thingiverse.com/thing:3048385
https://www.thingiverse.com/thing:5443129
I printed these with eSUN PETG filament at 0.05mm layer height with a 0.4mm nozzle, however 0.1mm layer height is doable. Same goes with the filament, PLA might be fine.
I am not responsible for any damage you may inflict on your 3DS if you try this replacement. Try it at your own risk.