Search results: 2ds

Counting matching models…

Printables

2DS circle pad

This is a replacement circle pad cover for a Nintendo 2DS/3DS. This is just a cover for the circle pad if the old rubber has peeled off. Print this in TPU with supports on the bottom.

Order a print of this model

Printables

HELIX IMPACT ISM 400.2DSP stand

The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.

Order a print of this model

Printables

Nintendo 2DS display stand

Original design uploaded by TickyTacky. Attached the arms of the stand to the base for ease of printing, now you don't have to jam the arms into the base and prints faster if you're using multicolor.

Order a print of this model

Printables

New Nintendo 3ds/2ds xl C-stick Grip

New nintendo 3ds/2ds xl c-stick grip

Order a print of this model

Printables

Dotykove pero, tuzka pro Nintendo DS, 2DS, DSi dotyk displej

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas pero, tuzku pro konzoly typu nintendo (Nintendo DS, Nintendo DSi, Nintendo 2DS, atd). Tuzka je vyzkousena a funguje…

Order a print of this model

Printables

Nintendo 2DS Skadis Mount

Needed a skids mount for my Nintendo 2ds. so I combined 2 files

Order a print of this model

Printables

Nintendo DS Family Customizabile Stand (for DS/lite/DSi/3DS/2DS etc.)

I like this Nintendo DS lite stand from @baumesfab31as it's really fast to print and save a lot of material. However I prefer embossed design as it looks better in low-end FDM printer when printed in multicolor. Thus, I redesigned from…

Order a print of this model

Printables

2DS circle pad

This is a replacement circle pad cover for a Nintendo 2DS/3DS. This is just a cover for the circle pad if the old rubber has peeled off. Print this in TPU with supports on the bottom.

Order a print of this model

Printables

2DS Wall Mount

For Mounting 2DS on your wall, I used alien tape, but make a copy with screw holes!

Order a print of this model

Printables

2ds door stop

Should be 1:1 scale with 2ds.

Order a print of this model

Printables

2ds cover

Do with this as you wish. I made it for protection, but you can make whatewer you want from it, for example a stand so it looks cool on a shell. OwO :P

Order a print of this model

Printables

2DS XL Hylian Cover Plate

A replacement for the top cover of a 2DS XL based on the official Nintendo Hylian Shield edition

Order a print of this model

Printables

2DS Stand

Display Stand for 2DS Sleek, sturdy and fast printing display stand for 2DS. This is one of a series of stands for different handheld consoles I created for a friend. All other stands can be found in this collection. Parts The stand…

Order a print of this model

Printables

Nintendo DS dummy cartridge (DS/DSi/3DS/2DS)

No longer needing anything in Slot-1 of any of my Nintendo DSs, I wanted something stopping pocket lint from entering the device. This dummy cartridge does the trick. Category: Video Games

Order a print of this model

Printables

NEW! 2DS joystick replacement

This is a replacement joystick for the “NEW! 2DS XL.” However, it should be compatible with most 3DS families. I highly recommend using resin to print this, as that's how I printed it. This needs support because it is full of cavities! Do…

Order a print of this model

Printables

HELIX IMPACT ISM 400.2DSP stand

The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.

Order a print of this model

Printables

Nintendo 2DS display stand

Remix of the display stands made by @Joris , fitting the Nintendo 2DS. Simple print. Just print flat and the Nintendo 2DS logo sticks out so you can do a color swap to give the logo an extra dimension. Includes a version for usage with…

Order a print of this model

Printables

SKADIS 3DS/2DS Charger Holder

Adding another model to the world of SKADIS video game organization. The cord can be wrapped through the cutout as shown and tucked into the cable clips at the top or the clips can be used to hold a bundled cable in the cradle. Is there…

Order a print of this model

Printables

Nintendo new 2DS/3DS XL Tilted Stand

Handy stand to have your 3DS laying in front of you with a slight tilt. It's very comfortable to e.g. Wondertrade a lot without having to pick up the device all the time and offers a hole for your pen to rest. It fits all forms of…

Order a print of this model

Printables

Nintendo new 2DS/3DS XL Vertical Stand

Simple stand for a new Nintendo 3DS XL. Looks good and it doesn't take up as much space as horizontally, while still allowing charging. Printable on both side and bottom. Print instructions Unassociated tags: golden sun Category: Toy &…

Order a print of this model

Printables

Nintendo 2DS SD Card Slot Cover

I got a second hand console that was missing the slot cover. Luckily, I could get my hands on another console and realized this should be totally printable. Use the finest resolution available on your printer. I used 0.08mm Extra Fine on…

Order a print of this model

Printables

New Nintendo 3DS / 2DS XL Stand

I made this specifically in mind for my New 3DS XL and 2DS XL. I wanted the stand to allow access to the audio output on the bottom of the 3DS. I put in a tray for my larger stylus, but it also works to help route an audio cable. Print…

Order a print of this model

Printables

Nintendo 2ds Grip

Comfort grip for Nintendo 2ds console.

Order a print of this model

Printables

Nintendo 2DS Multiboard Shelf

Printed in matte PLA at standard settings and came out great.

Order a print of this model

Printables

New Nintendo 2DS XL Charging Dock

Charging dock for the New Nintendo 2DS XL System. 2 versions uploaded, one with the guides attached to the model, other with no guides for printing them appart with some TPU filament. Print Settings Printer: JGAurora A5 Rafts: No…

Order a print of this model

Printables

Nintendo 2DS Display Stand & Kit

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore Our stands come in 2 varieties, stand and kit. The Stand…

Order a print of this model

Printables

New Nintendo 2DS XL Display Stand & Kit

Order a print of this model

Printables

Nintendo 2DS Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Order a print of this model

Printables

New Nintendo 2DS XL Stylus

If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…

Order a print of this model

Printables

Nintendo 2DS display stand

Original design uploaded by TickyTacky. Attached the arms of the stand to the base for ease of printing, now you don't have to jam the arms into the base and prints faster if you're using multicolor.

Order a print of this model

Printables

TLOZ Edition Top Cover for New 2DS XL

Nintendo New 2DS XL – Zelda-Inspired Top Cover This is a custom top cover designed for the Nintendo New 2DS XL , inspired by The Legend of Zelda limited edition aesthetics. The model has been carefully designed to match the original…

Order a print of this model

Printables

companion and weighted storage cubes from portal faceplates for new 2ds xl

Order a print of this model

Printables

"Gripstick" custom anti slip Circle Pad stick for 3ds and 2ds

A simple replacement for your 3ds and 2ds circle pad which should reduce the slipping issiue of your circle pads.

Order a print of this model

Printables

New Nintendo 3ds/2ds xl C-stick Grip

New nintendo 3ds/2ds xl c-stick grip

Order a print of this model

Printables

New 2DS (XL/LL) Hinge Repair / Fix

A small part that's glued into the hinge area at the back. This is useful if your device is very old and the hinge is already quite loose. It makes the hinge a bit firmer and reduces the excessive wobble. The device will then only have a…

Order a print of this model

Printables

Nintendo 2DS Key Chain Charm

This is a stylized Nintendo 2DS Model which can be used on a key chain. It's about the size of a Canadian/US Quarter. If you don't have a 3D Printer we also sell pre-printed units with a key chain at on our store at: etsy -…

Order a print of this model

Printables

Soporte Pared Nintendo 2DS

Soporte de pared para Nintendo 2DS.

Order a print of this model

Printables

Nintendo 2DS Dual Speaker Mod

Important notes: Many permanent modifications will be done to the system shell. Keep a slow pace. The secondary speaker will cover the notification LED. I have not achieved an appropriate method of directing light elsewhere. The audio…

Order a print of this model

Printables

Nintendo 2ds battery cover plate

A replacement battery cover for the 2ds. I needed a base backplate model that i could edit myself for a battery mod I'm planning to do in the future. There is a version with and one without a game card icon near where the game card slot…

Order a print of this model

Printables

Nintendo 2DS D-Pad Conversion Mod

Important notes: A few permanent modifications will be done to the system shell. Modifications should not effect the OEM D-Pad setup. The mod will raise the motherboard slightly. The four d-pad screws should not be overtightened. This mod…

Order a print of this model

Printables

Nintendo 2DS ABXY Button Spacers

Important notes: Each spacer should fit inside its respective button housing with enough play to not get snagged when the button is fully pressed up or down. Adjust the thickness of the spacers as needed. Print notes: Slicer settings…

Order a print of this model

Printables

2DS Stylus Pen

Recommended material is PETG Supports ON Post processing: 1) sharpen using a pencil sharpener to remove any drooping of the underside of the tip 2) shave off any skirt along the shaft to ensure it feels round. 3) Use a hot air gun on the…

Order a print of this model

Printables

Nintendo 2DS Stand

Stand for Nintendo 2DS (remix) Please use latest version (v3). Remixed from https://www.thingiverse.com/thing:5029684 Print Settings Rafts: No Supports: No Category: Video Games

Order a print of this model

Printables

New 2DS XL/LL Charging Dock

A New 2DS XL/LL Charging Dock for with or without a case. See images for case used. Easily charge your 2DS on your desk or nightstand by sliding it into this dock similar to how you would a Nintendo Switch. Simply print, feed the 3DS/2DS…

Order a print of this model

Printables

Nintendo 2DS Stand

Michal's model had many strange holes, and the diagonal logo didn't look very good after printing, so I made my own version from scratch. I printed it with Eryone Glitter Blue PLA (https://www.amazon.com/dp/B07Q85XYMD)

Order a print of this model

Printables

Kirby Faceplate for New Nintendo 2DS XL

A simple cute, and easy to print faceplate for the New Nintendo 2DS XL. To remove the original faceplate I heated my printer's bed to 40° C and laid the top of the console down on it for 40 seconds. If your printer doesn't have a heated…

Order a print of this model

Printables

Nintendo 2dsxl holder

Dies ist ein Halter für den Nintendo 2DS XL

Order a print of this model

Printables

Midland Alan 42DS Stand

Simple stand for the Alan 42DS. I added rubber pads to the bottom to keep it from slipping. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.3 Infill: 20 Filament: Sunlu PLA silk silver Category: Hobby

Order a print of this model

Printables

New Nintendo 2DS XL Telescopic Stylus

I created this telescopic version of the New 2DS XL stylus because I found the original one way to short to use comfortably with adult hands. The version in the picture was made on a Polyjet printer. The files “Tip” and “innerstop” were…

Order a print of this model

Printables

Grip for Nintendo New 2ds XL LL

a grip for the 2ds xl similar to my others that I designed over a year ago and apparently forgot to upload 3.3 improves durability and fit 3.4 is probably a better fit, but definitely less durable Category: Video Games

Order a print of this model

Printables

2DS Logo Wall Art

Use a color swap for the line work to add contrast. The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in. A thin version at 2mm total thickness is included to reduce material and print…

Order a print of this model

Printables

New 2DS XL Skadis Mount

a remix to fit the New 2DS XL, it's a little bit larger so not a tight fit.

Order a print of this model

Printables

Soporte Nintendo 2DS

Soporte para videoconsola portatil Nintendo 2DS

Order a print of this model

Printables

New 2DS XL Grip

Final version of my new 2ds xl grip.

Order a print of this model

Printables

2ds stand

Remix of popular console stand to fit Nintendo 2DS

Order a print of this model

Printables

New 2DS XL Soft Reset Aid

I made this to make it easier to soft reset Pokemon GBC virtual console games on my New 2DS XL. The reason I use the buttons over the touch screen is because it is a bit faster, and also there is some evidence to suggest that resetting…

Order a print of this model

Printables

New 2DS XL Soft Reset Aid

This is made specifically for New 2DS XL, it does not fit my New 3DS XL and I do not have a 3DS XL to test it on but I assume it will not fit that either. I plan on modifying this one to fit the New 3DS XL at some point in the future. I…

Order a print of this model

Printables

Updated New 2DS XL Soft Reset Aid

This is made specifically to fit the New 2DS XL and will not work with other models. Print options Layer height: .12mm (for accurate button heights, do not go higher than .12mm) Infill: 20% or more, Cubic. I like to print mine with a high…

Order a print of this model

Printables

Stojan, drzak na Nintendo DS / 3DS / 2DS

Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas stojanek na konzole typu Nintendo, PSP, PS Vita. Konkretně je model tvořen pro konzolu Nintendo DS, ale ostatní…

Order a print of this model

Printables

Dotykove pero, tuzka pro Nintendo DS, 2DS, DSi dotyk displej

Order a print of this model

Printables

Nintendo 2DS holder for Honeycomb Storage Wall

A holder for mounting the Nintendo 2DS to a Honeycomb Storage Wall

Order a print of this model

Printables

Replacement C-Stick for New Nintendo 3DS/2DS Series

This is a replacement part for the C-Stick found on the New Nintendo 3DS/New 3DS XL/New 2DS XL handhelds. Things you need to be aware of: You need to remove the old C-Stick first. This can be done by disassembling your 3DS, or cutting the…

Order a print of this model

Printables

Nintendo 2DS Xl Charging Dock with Extruded Text

Charging dock for the Nintendo New 2DS XL remixed from the excellent design by kelmi92 on thingiverse. I much prefer extruded logos so this is my remix

Order a print of this model

Printables

2DS Replacement Rubber Analog Stick

I glued it on top of the stick that had worn out to bare plastic with a little superglue

Order a print of this model

Printables

Nintendo 2DS Skadis Mount

Needed a skids mount for my Nintendo 2ds. so I combined 2 files

Order a print of this model

Printables

Nintendo 2DS Stylus

A stylus for the Nintendo 2DS. I tested it and revised it over 5 times to make sure it was perfect. I designed it myself, and it is my first item I've designed in Fusion 360. Enjoy! (I bumped my workspace while it was printing a few…

Order a print of this model