Camera Top Handle - Cold Shoe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printed cold-shoe mounted top handle for any camera
- Rating
- 0 / 5
- Likes
- 58
- Downloads
- 60
- Makes
- 0
- Views
- 714
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
MY LOGO IS NOT PRESENT IN THE MODEL!
Just buy the metal "Camera hot Shoe Holder to 1/4"-20 Tripod Screw Adapter" with 0.2" thick nuts from china and print this out!
Include 2x blank holes you can run a ¼-20 cut tap through to add other mounts. A leash connected to the strap buttons wouldnt be the worst thing in the world to add.
I recommend you tighten the bottom 2 nuts to act as a jam nut, then tighten the top nut with the handle 180* from where you want it to end up. When you're finger tight, turn the handle that last ½ turn and the nut will tighten up with it to a degree where it will no longer want to spin.
Not responsible for if it breaks, but it shouldnt. 5mm thick petg printed like this can support up to 185lbs in my testing of S hooks.