1 / 3
80mm 2020 aluminum extrusion offset mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
offset mountable to 2020 extrusions
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Mount a standard 80mm computer fan to a 2020 extrusion bar using M3x8 screws and metal T-Nuts (or 3d printed). The original model used a fan with rubber corners, so there is a small gap if the fan does not have this. I used four M3 washers to make up the space on each screw. I used M3x35 and nuts to secure the fan but a 30 should work.
An additional 80mm fan attached to the bottom of a double INBXX on the left side to help stir the warm air from Semismart Advanced. The offset allows enough space between the fan and plexi for optimum air flow.